IP Group PLC Oxford Nanopore in development of covid19 test

TIDMIPO

IP Group PLC

22 May 2020

 
 FOR RELEASE ON   22 May 2020 
 

IP Group plc - Portfolio company Oxford Nanopore Technologies announces advanced development of LamPORE, for rapid, highly scalable, low-cost COVID-19 detection

IP Group plc (LSE: IPO) ("IP Group" or "the Group" or "the Company"), the developer of intellectual property-based businesses, notes that its portfolio company Oxford Nanopore Technologies Limited ("Oxford Nanopore"), has announced that it is in advanced development of a new generation of end-to-end test (assay) for the detection of SARS-CoV-2, the virus that causes COVID-19.

The LamPORE assay is designed to be rapid, low cost, and scalable to cater to on-demand analysis of smaller sample numbers, to very large numbers of samples. LamPORE is based on Oxford Nanopore's DNA/RNA sequencing technology, in combination with a simple, sample-preparation method (loop-mediated isothermal amplification, plus Oxford Nanopore's 'rapid kit'). It seeks to understand whether a sample currently contains SARS-CoV-2 (rather than detecting antibodies that may indicate a previous infection).

LamPORE is the first assay that the Company has developed in-house with intended use in diagnostic applications, subject to relevant authorisations that the Company is currently pursuing. Oxford Nanopore is planning to deploy LamPORE for COVID-19 in a regulated setting initially on GridION and soon after on the portable MinION Mk1C.

IP Group holds an undiluted beneficial stake of 16.4% in Oxford Nanopore.

Alan Aubrey, Chief Executive of IP Group , said: "Oxford Nanopore has been supplying countries all over the world with sequencing capability throughout this pandemic and it's exciting to see the first diagnostic assay developed in-house, using their expertise, technology and networks to help support the response to this crisis."

Since the first emergence of the virus, Oxford Nanopore's rapid, portable sequencing technology has been used extensively for COVID-19 epidemiology and scientific research.

The full announcement follows.

For more information, please contact:

 
 IP Group plc                           www.ipgroupplc.com 
                                        [phone] 
 Greg Smith, Chief Financial Officer     [phone]/+44 (0) 
  Liz Vaughan-Adams, Communications      7979 853802 
 Charlotte Street Partners 
 David Gaffney                          [phone] 
 Andrew Wilson                          [phone] 
 

Notes for editors

About IP Group

IP Group is a leading intellectual property commercialisation company which focuses on evolving great ideas, mainly from its partner universities, into world-changing businesses. The Group has pioneered a unique approach to developing these ideas and the resulting businesses by providing access to business building expertise, capital (through its 100%-owned FCA-authorised subsidiaries IP Capital and Parkwalk Advisors), networks, recruitment and business support. IP Group has a strong track record of success and its portfolio comprises holdings in early-stage to mature businesses across life sciences and technology. IP Group is listed on the Main Market of the London Stock Exchange under the code IPO.

For more information, please visit our website at www.ipgroupplc.com .

ENDS

Oxford Nanopore Technologies announces advanced development of LamPORE, for rapid, highly scalable, low-cost COVID-19 detection

-LamPORE is designed for use in both high-throughput labs or decentralised locations-

Oxford, UK, 22 May 2020. Oxford Nanopore Technologies is in advanced development of a new generation of end-to-end test (assay) for the detection of SARS-CoV-2, the virus that causes COVID-19.

The LamPORE assay is designed to be rapid, low cost, and scalable to cater to on-demand analysis of smaller sample numbers, to very large numbers of samples. Hardware and reagents sit outside current, squeezed supply chains for other molecular tests.

LamPORE is based on Oxford Nanopore's DNA/RNA sequencing technology, in combination with a simple, sample-preparation method (loop-mediated isothermal amplification, plus Oxford Nanopore's 'rapid kit'). It seeks to understand whether a sample currently contains SARS-CoV-2 (rather than detecting antibodies that may indicate a previous infection).

Since the first emergence of the virus, Oxford Nanopore's rapid, portable sequencing technology has been used extensively for COVID-19 epidemiology and scientific research .

LamPORE is the first assay that the Company has developed in-house with intended use in diagnostic applications, subject to relevant authorisations that the Company is currently pursuing. Oxford Nanopore is planning to deploy LamPORE for COVID-19 in a regulated setting initially on GridION and soon after on the portable MinION Mk1C.

The LamPORE protocol will also be made openly available for research use on any Oxford Nanopore device.

Oxford Nanopore's vision is to support wide efforts to identify, track, trace and isolate cases. LamPORE is designed to enable rapid detection of SARS-CoV-2, whether in a high-throughput centralised lab processing thousands of samples, or for on-demand analysis in decentralised locations, so that analysis can be performed in more community settings.

LamPORE is designed to enable:

-- Very high throughput, centralised lab-based analyses: for example, to support routine screening of workforces - whether on the frontline or to support a general return to work. This might include regular screening of healthcare workers/other public sector employees, or businesses' employees, whether symptomatic or asymptomatic.

-- Near-community : Also designed to be deployable in decentralised environments, LamPORE opens up potential opportunities for rapid, local testing as restrictions are eased, for example in care homes, transport networks, businesses or other community settings. Decentralisation supports rapid turnaround of testing, which is important to enable rapid, precise isolation and therefore prevent onwards transmission of the virus.

The LamPORE method can also be used to analyse environmental samples to assess for the presence of the SARS-CoV-2 virus. This has the potential to be used for swabbing surfaces, or systems such as water treatment.

LamPORE does not rely on reagents used in traditional COVID-19 tests, which could ease pressure on current supply chains and expand access.

"This year we have gained extensive experience supporting customers using our sequencing technology for COVID-19 epidemiology, and we have also been directing our own powerful innovation and development engine at COVID-19," said Dr Gordon Sanghera, CEO of Oxford Nanopore. "We designed our first nanopore sequencing device to be used by any scientist, anywhere. Now, with LamPORE, we want to bring the accessibility and scalability of nanopore sequencing into the area of rapid testing."

Oxford Nanopore is collaborating with scientists in multiple institutions for rapid optimisation and validation of the LamPORE method for SARS-CoV-2 detection.

About LamPORE

The LamPORE method provides certain advantages in the detection of SARS-CoV-2:

-- Simple materials for precise results: With simple hardware requirements, LamPORE combines the established, rapid, low cost LAMP method for initial amplification of the virus with Oxford Nanopore sequencing for a precise, digital result.

LAMP alone has been used for the detection of virus with a colour based readout, but interpretation of colour-based results can be challenging at scale; sequencing provides a digital 'readout'

-- Available materials: The reagents required are low-cost and are detached from the supply chains that currently serve RT-PCR testing systems, where devices and reagents are in global short supply

-- Scalability and rapid results : Scaling-up of sample numbers is performed using molecular barcodes to run multiple samples at the same time.

o When used on the smallest sequencing device, MinION, 96 samples can be analysed in around an hour or 1,152 samples in around 4.5 hours. Smaller numbers can be analysed on-demand if required

o Where there is a requirement to process much larger numbers of samples, a single desktop GridION sequencing device allowed five times this number (480 samples in just over an hour, or 5,760 samples in 4-5 hours), in the same timeframe

   --    Sample type:   The assay is being developed for compatibility with swabs or saliva samples. 

-- Analysis of other pathogens: The LamPORE method also has the potential to be developed for the simultaneous analysis of multiple pathogens including SAR-CoV-2. This has potential utility when the prevalence of COVID-19 has fallen, and that of other respiratory pathogens is high, in order to screen for SARS-CoV-2 when it is less common in a population

-ends-

Contact: [e-mail]

www.nanoporetech.com/covid19

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact [e-mail] or visit www.rns.com.

END

NRAPPUCUAUPUPGG

(END) Dow Jones Newswires

May 22, 2020 02:00 ET (06:00 GMT)