Taken some back this morn, has to turn soon off 111s with the buy backs, GLA |
Hello, is anyone here?
A trading update today and little to no trading volume and zero postings for months! |
![](https://images.advfn.com/static/default-user.png) Hercules Intersects 300m of 0.70% CuEq, including 138m of 1.01% CuEq, Starting 70m from Surface
Toronto, Ontario / January 15, 2025 – Hercules Metals Corp. (“Hercules Metals” or the “Company”;) (TSX-V: BIG) (OTCQB: BADEF) (FRA: C0X) is pleased to announce new step-out drilling results from its Hercules Property in western Idaho (“HerculesR21; or the “Property̶1;). Drill hole HER-24-20, a 330m step-out, intersected 300m of 0.70% CuEq, beginning at a true depth of 70 meters below surface – the shallowest that porphyry mineralization has been drilled on the Property. Figure 2 illustrates the thinning cover sequence, which fully pinches out to the east, and exposes a multi-kilometer copper-molybdenum-gold-in-soil anomaly – to be drilled for the first time in the coming drill campaign.
A separate step-out hole, HER-24-19, was collared 530m southwest of HER-24-20, and intersected 149m of 0.78% CuEq, including 43m of 1.22% CuEq.
These step-out holes expand the system to the south and southeast, building on recent results in HER-24-12, which saw grades increasing at the opposite end of the system, toward the north and at depth.
Highlights Step-out hole HER-24-20 intersects 300m of 0.70% CuEq, including 138m of 1.01% CuEq beginning 70m below surface – the shallowest porphyry intercept to date. Overlying cover pinching out, exposing a multi-kilometer copper-molybdenum-gold soil anomaly – to be tested in the coming drill campaign. Builds on recent drilling at the opposite end of the system, with mineralization now increasing in multiple directions. Large step-out hole HER-24-19 also intersects 149m of 0.78% CuEq, including 43m of 1.22% CuEq. Management Commentary
Chris Paul, CEO and Director of the Company, noted: “The Eastern Block Zone remains one of the best undrilled targets at the Hercules Property. So far, our efforts have focused on the initial discovery area, while gradually moving toward the large soil anomaly first identified in 2022. While securing the US Forest Service (USFS) permit to drill the Eastern Block late last season, the combination of approaching winter conditions and a backlog of assays led us to postpone that new road and drill pad construction until early 2025. However, with assays confirming the enrichment zone approaches within 70 meters of surface near HER-24-20, we’re now better positioned to begin targeting the highly anticipated Eastern Block Zone this spring.
The most recent IP survey indicates that mineralization extends well beyond the current limit of drilling. Despite expanding the survey in 2023, many anomalies in the western half remain open outside the survey area. To address this, the Company is now considering the largest geophysical survey ever conducted at the Hercules Property. Such a survey could involve working with a co-operative group of neighbouring companies, which would increase the overall coverage and depth of penetration. We look forward to sharing details as they come available.” HER-24-19 and HER-24-20 CORE PHOTOS AVAILABLE FOR VIEWING AT:
hxxps://www.herculesmetals.com/hercules/core-photos/
Table 1: Highlight Intercepts Hole ID From (m) To (m) Interval (m) Cu (%) Ag (g/t) Mo (ppm) CuEq (%)1 HER-24-19 286.51 435.89 149.38 0.62 11 116 0.78 including 291.08 333.76 42.68 0.92 30 96 1.22 HER-24-20 102.11 402.34 300.23 0.55 4 182 0.70 including 177.88 315.47 137.59 0.85 5 172 1.01
Figure 1: Drill Plan with grade bars for copper (orange) and molybdenum (dark blue) for holes with assays received. Surface projection of secondary enrichment blanket outlined in orange. Location of cross-section A-A’ shown on Figure 2 is indicated by black line.
Figure 2: Cross-section A - A’. The higher-grade enrichment zone trends directly under a large untested soil anomaly in the Eastern Block Zone – a focus of the upcoming drill plan. The inferred location of a magmatic hydrothermal breccia intersected by HER-24-20 is shown for reference. It is unclear how far east the breccia extends; however, the source of certain strongly altered and mineralized clasts presents a compelling target.
Table 2: Additional Intercepts Hole ID From (m) To (m) Interval (m) Cu (%) Ag (g/t) Mo (ppm) HER-24-14 175.53 176.14 0.61 2.16 6 1 HER-24-15 331.62 344.12 12.5 0.53 1 37 AND 423.18 456.9 33.72 0.59 4 19 HER-24-16 DID NOT REACH UNCONFORMITY HER-24-17 615.7 774.19 158.49 0.21 3 52 HER-24-18 427.21 617.62 190.41 0.24 2 47
Drill Hole Summaries
HER-24-20 was collared near a significant copper-in-soil anomaly where the porphyry system is exposed at surface. Mineralization begins just 70 meters vertically below surface (Figure 2).
The hole starts within silver-bearing Jurassic rhyolite. Beneath the Jurassic cover, a newly identified late-stage magmatic hydrothermal breccia is intersected, with mineralization in both the matrix and clasts, which increase in intensity toward the footwall contact. The clasts – rock fragments transported upward through explosive activity – are strongly altered and veined, with some having substantial mineralization. The source of these mineralized clasts represents a compelling new conceptual target for future exploration.
Below the hydrothermal breccia, the hole intersects a high-grade section containing 138m of 0.85% Cu, 5 g/t Ag and 172 ppm Mo. A broader interval, encompassing the mineralized breccia, returned 300m of 0.55% Cu, 4 g/t Ag and 182 ppm Mo, marking the strongest molybdenum grades encountered to date.
HER-24-19 intersected 149m of mineralized wall rock grading 0.62% Cu, 11 g/t Ag, and 116 ppm Mo, including 43m of 0.92% Cu, 30 g/t Ag, and 96 ppm Mo. Subsequently, the hole entered a low-grade late porphyry, as described in a previous news release dated November 19, 2024. The distinction between the low-grade late porphyry and higher-grade wall rock remains the central focus for our geological modeling team ahead of the 2025 drill program.
HER-24-16 was a wildcat hole designed to test the southern extension of a large IP anomaly. The hole was collared in the Southern Flats Zone, a basalt-covered plateau in the southern part of the property. Previously, the post-mineral basalt had prevented historical exploration and drilling in the area. However, new IP data shows the porphyry system extends this way at depth, while surface sampling and mapping reveals the shallow silver system trends directly underneath it as well.
HER-24-16 confirmed the basalt layer to be less than 40 meters thick, significantly thinner than expected. Below the basalt, silver-bearing Jurassic rhyolite extends to the end of the hole at 710m. The rhyolite was selectively sampled, returning 160m of 23 g/t Ag, 0.19% Pb and 0.11% Zn, including a higher-grade sub-interval of 31m of 79 g/t Ag, 0.87% Pb and 0.12% Zn. As a result, the remainder of the hole is now being sampled. The presence of epithermal mineralization below the basalt supports the interpretation that the chargeability anomaly reflects an extension of the porphyry system, linked to the same major regional structures. Follow-up drilling is planned east of HER-24-16, where the Jurassic cover thins near the copper-in-soil anomaly discussed earlier (Figure 1).
Notably, recent metallurgical testing yielded silver recoveries exceeding 80% using a simple two-step leaching process, presenting a favorable scenario for evaluating potential pre-stripping opportunities in the future.
Table 3: New Southern Flats Silver Zone Intercepts Hole ID From (m) To (m) Interval (m) Ag (g/t) Pb (%) Zn (%) HER-24-16 47.24 207.42 160.18 23 0.19 0.11 including 60.96 92.26 31.30 79 0.87 0.12 including 77.72 80.77 3.05 310 1.39 0.10
Table 4: Other Silver Intercepts in Jurassic Cover Sequence Hole ID From (m) To (m) Interval (m) Ag (g/t) Pb (%) Zn (%) HER-24-15 5.88 23.62 17.74 10 - 0.15 HER-24-17 582.17 643.13 60.96 10 - - including 615.7 621.79 6.09 29 - - HER-24-18 6.10 132.59 126.49 7 0.23 0.24 including 54.86 65.53 10.67 22 0.69 0.39 including 124.97 129.54 4.57 37 2.27 0.48 HER-24-19 0 45.72 45.72 29 - - including 0 25.91 25.91 43 - -
Table 5: Reported Drill Hole Locations Hole ID Easting Northing Elevation Depth (m) Azimuth Dip HER-24-14 512155.6 4955436.9 1255.1 197.08 55.02 -55.01 HER-24-15 511967.5 4957150.7 1584.9 557.20 34.93 -69.99 HER-24-16 511421.5 4954971.1 1258.9 709.70 320.00 -75.00 HER-24-17 510922.1 4955814.0 1275.6 975.36 75.03 -70.02 HER-24-18 511962.6 4957148.7 1581.0 644.32 199.89 -55.22 HER-24-19 511437.5 4955990.4 1364.0 517.49 134.41 -51.08 HER-24-20 511928.8 4956200.0 1437.5 625.45 260.12 -45.24
Sample Analysis and QAQC
All drill core samples were prepped and analyzed at MSA Labs in Langley, British Columbia, an ISO 17025 and ISO 9001 certified laboratory. Samples were dried and crushed to 2mm, from which a 250g sub-sample split was then pulverized to 85% passing a 75 micron sieve. Following preparation, assays were determined by the IMS-230 method. A 0.25g aliquot of the prepared pulp was digested in a 4-acid solution consisting of hydrochloric, nitric, perchloric and hydrofluoric acids. 4-acid is a near total digest and only the most highly resistant minerals are not dissolved. The resulting solution was analyzed via ICP-MS and ICP-ES for 48 elements and was corrected for inter-element spectral interferences. Lower detection limits for this procedure are 0.01 ppm for silver, 0.5 ppm for lead, 2 ppm for zinc, and 0.2 ppm for copper. Mercury is not reported due to volatilization in reaction with hydrofluoric acid and gold is not reported due to the small, 0.25g aliquot size being insufficient to overcome the nugget effect.
Gold was analyzed by FAS-111, a 30-gram fire assay fusion with AAS finish. No significant results were reported.
Samples with initial results beyond the upper detection limit of the IMS-230 method were analyzed by procedures ICF-6Ag, ICF-6Cu, ICF-6Pb and ICF-6Zn. The thresholds are 100 ppm for silver, and >1% for copper, lead and zinc.
MSA Labs employs internal quality control standards, duplicates and blank samples at set frequencies.
Blind certified reference materials (CRMs) and blank samples were systematically inserted by the Company into the sample stream and analyzed as part of the Company’s quality assurance/quality control protocol.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved for disclosure by Kelly Malcolm, P.Geo., Director of Hercules Metals. Kelly Malcolm is a "Qualified Person" for Hercules Metals within the meaning of National Instrument 43-101 – Standards of Disclosure for Mineral Projects.
Corporate Update
The Company announces that Chris Longton has departed from his role as Vice President of Exploration. The Company thanks Mr. Longton for his valuable contributions to the advancement of the Hercules Project. The Company is currently evaluating internal and external candidates to fill the Vice President of Exploration position. Updates regarding this transition will be communicated in due course.
About Hercules Metals Corp. Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FRA:C0X) is an exploration Company focused on developing Idaho’s newest copper and silver district.
The 100% owned Hercules Project located northwest of Cambridge, hosts the newly discovered Leviathan porphyry copper system, one of the most important discoveries in the region to date. The Company is well positioned for growth through continued drilling, supported by extensive historical and current exploration and a strategic investment by Barrick Gold.
With the potential for significant scale, the Company’s management and board of directors aims to build on its proven track record which includes the discovery and development of numerous precious metals projects worldwide. |
Hercules Intersects 338 Meters of 0.47% Cu with Mineralization Increasing at Depth and to the North |
![](https://images.advfn.com/static/default-user.png) Hercules Intersects 338 Meters of 0.47% Cu with Mineralization Increasing at Depth and to the North
Toronto, Ontario--(Newsfile Corp. - November 19, 2024) - Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FSE: 8Q7) ("Hercules Metals" or the "Company") is pleased to announce new drill intercepts from its Hercules Property in western Idaho (“HerculesR21; or the “Property̶1;). HER-24-12 has intersected 338m of 0.47% Cu, with the final 154m ending in 0.51% Cu and 104 ppm Mo, marking the first recorded increase in mineralization at depth on the Property. Final assay results reveal the 315m step-out from HER-24-08 ended in strong mineralization, with alteration increasing from phyllic to outer potassic in the latter half. Furthermore, a north-south cross-section (Fig 2) now demonstrates copper and potassic alteration are increasing towards the Grade Creek Zone, where a large untested chargeability and magnetic anomaly presents one of the most compelling targets for a vertically extensive early porphyry center.
Highlights
Strongest primary mineralization below the enrichment blanket to date. The headline drill hole, HER-24-12, is a 315m step-out, northeast from HER-24-08, which recently intersected 480m of 0.47% Cu, 82 ppm Mo, including 55m of 1.5% Cu (See news release dated Oct 10, 2024). A new trend of increasing copper and potassic alteration toward a large untested chargeability and magnetic anomaly at the Grade Creek Zone (Figs. 1, 2, 4, 5). Trend is intersected progressively closer to surface to the north (Fig. 2). Modelling now constrains the geometry of a late porphyry intrusion (Fig. 2), allowing drilling to focus on the significantly better grades in all directions. Click here to view a summary of today's new release delivered by the Company's CEO, Chris Paul. Chris Paul, CEO and Director of the Company, noted: "Seeing primary copper grades now increasing below the secondary enrichment blanket is certainly an exciting new development for the project. The increasing grade as well as alteration temperatures to the north has significant implications for the large geophysical anomalies underlying the Grade Creek Zone (Figs. 4, 5). Review of core photos also shows early "A" and "B" veins intensifying down hole, both of which are known to increase toward the center of porphyry systems. Associated with the A and B veins is a transition from phyllic to biotite (outer potassic) alteration, potentially signaling proximity to a porphyry center."
HER-24-12 CORE PHOTOS AVAILABLE FOR VIEWING AT:
hxxps://www.herculesmetals.com/hercules/core-photos/
Table 1: Significant Intercepts
Hole ID From (m) To (m) Interval (m) Cu (%) Ag (g/t) Mo (ppm) HER-24-12 306.48 644.35 337.87 0.47 1.55 71 including 325.68 365.61 39.93 0.79 0.97 65 including 306.48 451.71 145.23 0.53 2.24 49 including 490.73 644.35 153.62 0.51 1.12 104 HER-24-11 236.22 516.94 280.72 0.31 0.47 32 including 310.59 364.85 54.26 0.70 0.73 40 HER-24-13 159.65 229.5 69.85 0.70 1.21 22 including 159.65 197.54 37.89 1.14 1.64 30
Cannot view this image? Visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_002.jpg
Figure 1: Drill Plan with grade bars for copper (orange) and molybdenum (blue) for holes with assays received. Approximate surface projection of enrichment blanket (secondary) and early biotite alteration (primary). Cross-section locations shown for Figures 2 and 3.
To view an enhanced version of this graphic, please visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_002full.jpg
Cannot view this image? Visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_003.jpg
Figure 2: Cross-section B - B' showing the orientation of the late porphyry intrusion and the strong contrast that copper grade has in the surrounding rock. Outside of the late porphyry, biotite altered wallrock is well mineralized, and increasing in intensity to the north. 24-12 has intersected the strongest primary hypogene grades outside of the enrichment blanket thus far.
To view an enhanced version of this graphic, please visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_003full.jpg
Geological Summary
Two types of mineralization occur within the Leviathan system. Primary hypogene mineralization, which formed during initial emplacement of the porphyry system, as well as a secondary blanket of enrichment which formed during a younger hydrothermal pulse. The primary mineralization is the main target, as it will often extend vertically for many hundreds of meters down the center of porphyry systems.
The enrichment blanket forms an attractive layer of high-grade bornite and chalcocite mineralization closest to surface, while the primary mineralization represents a larger target, with potential for yet its own high-grade core.
HER-24-12 encountered bornite and chalcocite mineralization, typical of the secondary enrichment blanket, which then transitions downward into the primary hypogene system. The primary system begins with phyllic alteration at the top, intensifying downward to a higher temperature biotite alteration with stronger chalcopyrite-pyrite mineralization. This represents the first hole in which the primary hypogene system strengthens with depth, indicating it may be the closest drilled to the hypogene core of the system.
Figure 2 presents a cross-section of HER-24-12, relative to a late porphyry that is lower grade than the surrounding volcanic rocks. However, as new drilling was completed, the late porphyry was modelled in 3D, which has significantly enhanced the Company's targeting of the higher-grade volcanic host rocks. Figure 2 provides an example of the strong increase in grade outside of the late porphyry. It should be noted that the causative early porphyry intrusion at Leviathan remains to be identified. Early porphyry intrusions can often contribute upwards of 90% of the copper to porphyry systems and are frequently higher in grade than the surrounding volcanic wall rocks. The large Grade Creek Zone and its prospective geophysical anomalies present a compelling area to begin testing for such a target.
Figure 2 illustrates the volcanics underneath the late porphyry are increasing in both grade and alteration, at progressively shallower depths to the north. Grades increase from 0.30% in 23-21 to 0.51% in 24-12 and are open toward a large area of anomalous chargeability and magnetics in the Grade Creek Zone (Fig. 4, 5).
HER-24-11 drilled into the upper edge of the late porphyry but exited into phyllic altered volcanics at the end of hole, with a significant increase in grade. The geological model presented here suggests that extending 24-11 would have strong potential for encountering potassic alteration with increasing grades.
HER-24-13 intersected strong enrichment blanket mineralization grading 1.14% Cu over 38 meters. The hole only cut the now modelled late porphyry, which is clear evidence that the strong grades introduced by the secondary enrichment blanket are younger, and were deposited after emplacement of the entire porphyry system.
Cannot view this image? Visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_004.jpg
Figure 3: Long-section A - A' showing increase in primary hypogene grade below enrichment blanket in HER-24-12.
To view an enhanced version of this graphic, please visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_004full.jpg
Cannot view this image? Visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_005.jpg
Figure 4: Depth slice through 3D magnetic inversion at level of porphyry system, showing untested magnetic anomalies relative to early biotite (outer potassic) alteration and increasing grade.
To view an enhanced version of this graphic, please visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_005full.jpg
Cannot view this image? Visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_006.jpg
Figure 5: Chargeability depth slice at 400 meters below surface. Drilling has largely been constrained within a broad zone of high chargeability and low magnetic intensity, characteristic of phyllic alteration. The Grade Creek Zone however is host to a large region of moderate chargeability (13-17 mV/V) and higher magnetic intensity, prospective for potential potassic alteration.
To view an enhanced version of this graphic, please visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_006full.jpg
Cannot view this image? Visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_007.jpg
Figure 6: The strongest chargeability on the Property, the Western Deeps Anomaly, is visible in a 600-meter IP depth slice. A single core hole attempted earlier this season, HER-24-10, was lost in Jurassic cover above the anomaly, failing to reach the target. Legacy Drilling's powerful RC rig will make the second attempt by starting in the east and drilling northwest through the Jurassic cover sequence early in the hole.
To view an enhanced version of this graphic, please visit: hxxps://images.newsfilecorp.com/files/9425/230546_fcb704e6f4c18a39_007full.jpg
Table 2: Reported Drill Hole Locations
Hole ID Easting Northing Elevation Depth (m) Azimuth Dip HER-24-11 511412.9 4956761.1 1401.6 522.4 58.04 -69.2 HER-24-12 511470.8 4957006.5 1405.2 644.4 90.43 -70.15 HER-24-13 511825.6 4956571.1 1507.1 639.8 90.19 -62.02
Sample Analysis and QAQC
All drill core samples were prepped and analyzed at MSA Labs in Langley, British Columbia, an ISO 17025 and ISO 9001 certified laboratory. Samples were dried and crushed to 2mm, from which a 250g sub-sample split was then pulverized to 85% passing a 75 micron sieve. Following preparation, assays were determined by the IMS-230 method. A 0.25g aliquot of the prepared pulp was digested in a 4-acid solution consisting of hydrochloric, nitric, perchloric and hydrofluoric acids. 4-acid is a near total digest and only the most highly resistant minerals are not dissolved. The resulting solution was analyzed via ICP-MS and ICP-ES for 48 elements and was corrected for inter-element spectral interferences. Lower detection limits for this procedure are 0.01 ppm for silver, 0.5 ppm for lead, 2 ppm for zinc, and 0.2 ppm for copper. Mercury is not reported due to volatilization in reaction with hydrofluoric acid and gold is not reported due to the small, 0.25g aliquot size being insufficient to overcome the nugget effect.
Gold was analyzed by FAS-111, a 30-gram fire assay fusion with AAS finish. No significant results were reported.
Samples with initial results beyond the upper detection limit of the IMS-230 method were analyzed by procedures ICF-6Ag, ICF-6Cu, ICF-6Pb and ICF-6Zn. The thresholds are 100 ppm for silver, and >1% for copper, lead and zinc.
MSA Labs employs internal quality control standards, duplicates and blank samples at set frequencies.
Blind certified reference materials (CRMs) and blank samples were systematically inserted by the Company into the sample stream and analyzed as part of the Company's quality assurance/quality control protocol.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved for disclosure by Christopher Longton BS, CPG, Hercules' Vice President, Exploration. Mr. Longton is a "Qualified Person" for Hercules Metals within the meaning of National Instrument 43-101 - Standards of Disclosure for Mineral Projects.
About Hercules Metals Corp.
Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FSE: 8Q7) is an exploration Company focused on developing Idaho's newest copper and silver district.
The 100% owned Hercules Project located northwest of Cambridge, hosts the newly discovered Leviathan porphyry copper system, one of the most important discoveries in the region to date. The Company is well positioned for growth through continued drilling, supported by extensive historical and current exploration and a strategic investment by Barrick Gold.
With the potential for significant scale, the Company's management and board of directors aims to build on its proven track record which includes the discovery and development of numerous precious metals projects worldwide. |
![](https://images.advfn.com/static/default-user.png) Hercules Intersects Shallow Porphyry Mineralization and New Hydrothermal Breccia
Toronto, Ontario / November 4, 2024 – Hercules Metals Corp. (“Hercules Metals” or the “Company”;) (TSX-V: BIG) (OTCQB: BADEF) (FWB: 8Q7) is pleased to provide an update on recent drilling as further assay results remain pending at the Leviathan porphyry copper system in western Idaho (“HerculesR21; or the “Property̶1;). RC drilling has advanced rapidly with three holes completed and a fourth in progress, including HER-24-17 being completed to 975m. Three new holes stepped to the southeast, HER-24-19 through -21, all intersected early biotite alteration with mineralization beginning progressively closer to surface, starting as early as 72m true depth in hole 24-20. The depth to mineralization continues to shallow toward a large untested copper anomaly at surface to the east.
Highlights Mineralization begins at 72m depth in HER-24-20 and remains open toward a large surface anomaly. Mineralized early biotite alteration intersected in 3 new holes to the southeast – and potentially plunging under HER-23-14, previously thought to be the edge of the system. A separate zone of early biotite was also encountered at depth in holes HER-24-08 and HER-24-12, which may be related to a separate intrusive center to the north. New magmatic-hydrothermal breccia pipe discovered by HER-24-20 represents a new target type, with vertically extensive potential. Mineralized envelope continues to expand – remains open in multiple directions. RC drilling continues to provide additional value, testing new targets rapidly, both pre-collar and otherwise.
Geological Summary
Drill holes HER-24-19 through -21 begin in shallow phyllic alteration associated with the enrichment blanket and transition with depth into varying degrees of biotite alteration consistent with an outer potassic shell. These new holes have significantly expanded the zone of early biotite alteration which shows increasing strength toward the south.
Of note is a separate zone of early biotite encountered at depth in holes HER-24-08 and HER-24-12 which have the potential to be related to a yet undiscovered intrusive center to the north.
HER-24-05 encountered a plug of late porphyry associated with a chargeability low, however high chargeability continues further south of Camp Creek and remains to be tested. Core drilling failed to reach the unconformity at this southern target but depending on weather conditions, Legacy Drilling may be able to test for further extensions of the system in this direction.
Legacy was able to complete HER-24-17 to the maximum working depth capacity of the RC rig at 975 m in very challenging ground conditions. The alteration encountered will be interpreted once geochemical and spectral results have been received and processed on the fine chips.
HER-24-19 and -21 both intersected enrichment blanket followed by intermediate sulfidation pyrite-chalcopyrite which remains open down plunge to the southeast. HER-23-14 was drilled at a shallow angle to the southeast in 2023, which is now interpreted to be subparallel with the plunge of the system. This may explain why the hole remained in the same distal alteration it started in, throughout its length. Future drilling will test underneath 23-14 by drilling northwest, against the plunge of the system.
Prior to entering the enrichment blanket, HER-24-20 intersected a compelling new magmatic hydrothermal breccia from 76m to 157m downhole, representing the first of its kind to be intercepted at Hercules. The breccia consists of strongly veined clasts of porphyry and wall rock within a fine chloritic matrix that becomes progressively more intrusive in nature near its footwall contact. Intermediate sulfidation pyrite-chalcopyrite mineralization occurs in the latter half of the intercept, within the matrix as well as clasts, and appears to increase in intensity downwards. The hole currently remains in progress in early biotite alteration.
Core photographs for the breccia intercept in HER-24-20 can be viewed on the Company’s website at the following link: hxxps://www.herculesmetals.com/hercules/core-photos/
Qualified Person
The scientific and technical information in this news release has been reviewed and approved for disclosure by Christopher Longton BS, CPG, Hercules’ Vice President, Exploration. Mr. Longton is a "Qualified Person" for Hercules Metals within the meaning of National Instrument 43-101 – Standards of Disclosure for Mineral Projects.
About Hercules Metals Corp. Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FWB: 8Q7) is an exploration Company focused on developing Idaho’s newest copper and silver district.
The 100% owned Hercules Project located northwest of Cambridge, hosts the newly discovered Leviathan porphyry copper system, one of the most important discoveries in the region to date. The Company is well positioned for growth through continued drilling, supported by extensive historical and current exploration and a strategic investment by Barrick Gold.
With the potential for significant scale, the Company’s management and board of directors aims to build on its proven track record which includes the discovery and development of numerous precious metals projects worldwide. |
Agreed - Directors sell for many reasons but with all the spin going on, I'm happy on the sidelines |
Sold out. Director selling big red flag.Only small loss thankfully |
Bought in today off the back of the buy back news.Stacks of cash so they have room to extend it. Chart looks to have bottomed but let's see. |
back to the nineties. PE ratio looks sky high. any opinions. I feel a significant down day |
![](https://images.advfn.com/static/default-user.png) Hercules Metals Announces Approval of Plan of Operations for Drilling New Targets on USFS
Toronto, Ontario / August 19, 2024 – Hercules Metals Corp. (“Hercules Metals” or the “Company”;) (TSX-V: BIG) (OTCQB: BADEF) (FWB: 8Q7) is pleased to announce that the United States Forest Service (“USFS”) has approved a Categorical Exclusion (“CatEx”) for its Plan of Operations (the “Plan”) allowing the Company to drill two large untested targets on its Hercules Property in western Idaho (“HerculesR21; or the “Property̶1;). This approval authorizes exploration activities on an eastern portion of the Property where the surface is administered by the USFS. The Plan contemplates drilling of the Grade Creek and Eastern Block targets, neither of which have been tested below the depth of shallow epithermal silver mineralization to the underlying Leviathan porphyry copper system (the “LeviathanR21;).
Highlights The USFS has issued a CatEx for up to 15 pre-selected drill sites to be tested through to the end of August 2025 (Figure 1). Two priority target areas, Grade Creek and the Eastern Block, have been selected for drill testing based on over 2,000 soil and outcrop chip samples, favourable chargeability values, and a theorized northwest tilt to the system. The Eastern Block is an interpreted fault block that includes the Metheny, Lighting and Big Cut zones. FS 17 or 18 will likely be the first pads to test the zone and assess if mineralization plunges, and therefore has greater preservation potential, to the southeast. Chargeability is low to moderate, as might be expected in deeper parts of the system where the phyllic alteration may transition to potassic. Four potential pad locations have been selected to test the Grade Creek Zone, including FS 11, 12, 13 and 03. Grade Creek has the best silver-lead-zinc and copper-molybdenum soil and rock chip anomaly on the Property. It also has high chargeability, suggesting a northeastern extension of the pyrite-rich phyllic zone. However, the hypogene enrichment tends to occur in the upper portion of the phyllic zone where high chargeability is the target. The Company is in the early stages of moving forward with an Environmental Assessment on the Property, to secure longer-term drilling on USFS lands once the CatEx expires. New targets on the USFS will initially be tested with core drilling to attain important geological information and guide further follow-up drilling of these new zones. RC drilling, scheduled to begin in mid-September, will supplement drilling of existing zones that the Company has been core drilling since 2023. Management Commentary
Chris Paul, CEO and Director of the Company, commented, “We’re excited to advance our exploration efforts with the newly secured CatEx permit, unlocking new targets to the east and northeast. We appreciate the diligence and support of the USFS in this process. Drilling in the west has revealed a large blanket of phyllic alteration. Recent mapping however suggests that the Triassic geology, and porphyry intrusions, may be tilted and partially eroded to the northwest, consistent with similar observations made by Scout Discoveries Corp. on their adjacent Cuddy Mountain property1. We look forward to testing downplunge of this theoretical tilt, within the Eastern Block.
In the north, the Grade Creek Zone shows the strongest geochemical anomaly on the Property. Despite this, historical operators were unable to test it due to steep terrain and associated road building challenges. The zone however represents the potential northeastern extension of a large phyllic zone, which is often overprinted with secondary (hypogene) copper enrichment.” |
![](https://images.advfn.com/static/default-user.png) Hercules Metals Provides Exploration Update
Toronto, Ontario / July 31, 2024 – Hercules Metals Corp. (“Hercules Metals” or the “Company”;) (TSX-V: BIG) (OTCQB: BADEF) (FWB: 8Q7) is pleased to provide an update on its ongoing exploration drilling program at its Hercules Property in western Idaho (“HerculesR21; or the “Property̶1;).
Highlights A total of 4,600m have been drilled in 6 completed, 3 abandoned and 3 in progress drill holes ranging up to 722m in depth (Figure 1). A potential trend of elevated hypogene copper-silver enrichment appears to be emerging, currently being tested in two directions:
Two drill rigs stepping to the northeast and southwest from the 2023 discovery area to test the potential trend of elevated copper-silver, immediately below the Triassic-Jurassic unconformity. A third drill rig is reconnaissance drilling compelling new targets across the property.
A large fault zone, referred to as the "BN Fault," had impacted drilling progress in holes HER-24-01, -05, -06, -07, -09, and -09b. However, the inferred geometry of the BN Fault has now been mapped in 3D, which enables future drill holes to focus on areas with more favourable ground conditions away from the fault. The Company is planning to enhance productivity by adding a deep RC drill rig with an effective depth capacity of ~1,200m. Roads are being widened to allow access for a larger rig which has indicated availability in early September. New mapping, shown on Figure 1, has enhanced the understanding of structural patterns and alteration zonation across the project. Triassic exposure in the east shows alteration increasing from propylitic to phyllic towards the northwest. Specular hematite, associated with the hypogene copper-silver enrichment, dips shallow beneath the unconformity (conglomerate). Management Commentary
Chris Paul, CEO and Director of the Company, noted, “Having drilled over 1 kilometer of strike along the Leviathan Porphyry this year has given us a much better understanding of certain key structural controls, which better guides our targeting of hypogene enrichment. Blind drilling has its logistical challenges, but new information is gained from each hole, which allows us to increase efficiency moving forward. Drilling is now vectoring toward the potential feeder structures for the hypogene enrichment event, which added copper and silver to the shallowest part of the system, beneath the unconformity.
At the same time, we are actively working to increase productivity by avoiding damaged fault zones and securing a deep RC drill rig to supplement the program with pre-collars for the core rigs as well as select RC-only drill holes.
Although the timing of the first assays is delayed due to slower than anticipated drilling and processing time, this has allowed us time to build a preliminary 3D model aimed at targeting hypogene enrichment.” Geological Update
Drilling continues to encounter porphyry alteration and mineralization over large areas. Emphasis has been placed on key structures which may have controlled both porphyry emplacement as well as later hypogene enrichment. One of these structures, the BN Fault, appears to have been later re-activated in the Jurassic, creating challenging ground conditions for drilling. A preliminary model of the BN Fault was recently developed, to avoid drilling within its proximity. Instead, drilling is stepping out along a separate NE-SW structure, which appears to control mineralization, with apparent minimal post-mineral damage.
A third drill rig is testing reconnaissance targets with favourable geophysical signatures that have not had previous drilling. Many targets remain to be tested across what appears to be a large and long-lived hydrothermal system.
A major regional-scale structure, “Tom’s Fault”, shown on Figure 2, trends NW-SE across the Property, and appears to be a potentially important regional control on porphyry emplacement. The intersection of regional scale NW-SE structures with NE-SW structures may play an important role on future exploration targeting.
2024 drill holes are shown on Figures 1 and 2. Drill holes HER-24-08, -11, and -12 are stepping out to the northeast along the inferred structural control mentioned above. Drill holes HER-24-09 and -09b were testing the same concept to the southwest, however both had to be terminated due to challenging ground conditions associated with the BN Fault. HER-24-06 also had to be terminated early due to the BN Fault, albeit in mineralization at 640 meters. The aim is to properly re-test this entire length of the chargeability anomaly to depth once the deep RC rig arrives.
HER-24-10 is currently testing a new chargeability anomaly to the west of the main Leviathan target. The hole is currently at 350 meters and has encountered a different Jurassic cover sequence than the other holes.
The scientific and technical information in this news release has been reviewed and approved for disclosure by Christopher Longton BS, CPG, Hercules’ Vice President, Exploration. Mr. Longton is a "Qualified Person" for Hercules Metals within the meaning of National Instrument 43-101 – Standards of Disclosure for Mineral Projects.
Corporate Update
The Company also announces that it has granted 500,000 incentive stock options (the "Options") to a contractor, with an effective date of July 30, 2024, with 250,000 vesting on the grant date, 125,000 vesting on the date that is six months following the grant date and 125,000 vesting on the date that is twelve months following the grant date. The Options are exercisable for a period of 5 years and have an exercise price of $0.62 per common share. The Options were granted pursuant to the Company's omnibus incentive plan approved by shareholders.
About Hercules Metals Corp.
Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FWB: 8Q7) is an exploration Company focused on developing Idaho’s newest copper and silver district.
The 100% owned Hercules Project located northwest of Cambridge, hosts the newly discovered Leviathan porphyry copper system, one of the most important discoveries in the region to date. The Company is well positioned for growth through continued drilling, supported by extensive historical and current exploration and a strategic investment by Barrick Gold. With the potential for significant scale, the Company’s management and board of directors aims to build on its proven track record which includes the discovery and development of numerous precious metals projects worldwide. |
todays announcement looks like a feeler for a profits warning in second half? |
![](https://images.advfn.com/static/default-user.png) New again today from Grosvenor Technology's website:-
"Insights
The GT8: Beyond Time & Attendance Tracking
As Grosvenor Technology’s flagship HCM device, the features of the GT8 go far beyond simple time and attendance management to embody something far more exciting – a new way to propel your business with rich data and streamlined processes.
Ben Lagden Commercial Director
Time clocks have come a long way from the mechanical punch clock of the past. Over the past 50 years, digital time clocks have taken over the space, offering a modern solution to an age-old problem – how to effectively and accurately manage your people.
But a time clock from 1990, or even 2012 is a long way from what they can do today. And the GT8 is leading the charge with innovation and user simplicity. As Grosvenor Technology’s flagship HCM device, the features of the GT8 go far beyond simple time and attendance management to embody something far more exciting – a new way to propel your business with rich data and streamlined processes.
Accuracy and Security for the Modern Workforce
Security and reliability are at the heart of the GT8, with the option of advanced biometric identification. You can choose from facial recognition, fingerprint scanning, or a combination of both (as well as more traditional means, such as proximity fobs and cards) to ensure accurate tracking of your employees’ time. And let’s not forget just how powerful the GT8 is – the device can clock someone in or out in under a second, making it a useful companion at start and end of shifts.
For many of the GT8’s users, it’s the effortless efficiency of employee time tracking that sets it apart. Staff feel assured by the reliable clocking – they’ll always receive accurate remuneration for their worked hours, and for management, there’s the elimination of time theft via buddy punching. It’s a win win.
But above all else, the GT8 provides absolute data privacy assurance. The GT8 has been designed with compliance in mind. The inbuilt robust encryption protocols protect sensitive employee information and ensure you remain compliant with data regulations – whether that’s in the UK, Europe, the US or Asia.
... How HCM Delivers Profits
Here’s what really matters – the tangible benefits that the GT8 can provide:
• Accurate Payroll: Staff are paid for the hours they work and buddy punching is a thing of the past.
• Reduced Security Risks: Data privacy is ensured, derisking your business in one of the most essential ways.
• Improved Hygiene: The touchless interface helps maintain a healthy workforce, which is especially critical in healthcare or food-related industries.
• Optimised Workforce Management: You can use collected data to make informed scheduling and staffing needs decisions.
The GT8: More Than a Time Clock
The GT8 is more than just a time clock. It’s a powerful tool that helps you streamline operations, enhance security, and make data-driven decisions that benefit your business.
You can find out more about the GT8 and its powerful features here." |
![](https://images.advfn.com/static/default-user.png) New today from the website of NWT subsidiary Grosvenor Technology:-
"Insights
Security Trends: Six Ways to Improve Safety in 2024
In an era of rapid technological advancement, the security landscape is in a perpetual state of flux, with new threats and bad actors constantly emerging.
Paul Smith Head of Quality & Compliance
In an era of rapid technological advancement, the security landscape is in a perpetual state of flux, with new threats and bad actors constantly emerging. In response, the security industry is continuing to push into new frontiers, with digital solutions driven by the likes of artificial intelligence (AI), biometrics, and multi-factor authentication.
Enterprises are facing ever-evolving challenges in safeguarding their physical and digital infrastructure. Understanding the dynamics behind new threats is key to fortifying defences and requires staying on top of emerging trends to make better-informed decisions. Therefore, the 2024 State of Security and Identity report, commissioned by HID, is an essential read for the industry.
The report surveyed over 2,600 end users and industry partners worldwide and identified the six major trends currently shaping security and identity.
Let’s take a look.
... Trend 5: The Cloud
Over a third of respondents (36%) said the rise of cloud-based authentication or identity management delivered as a subscription service is an important trend. These services simplify the process of creating and managing identities through a secure cloud delivery model. Currently, 24% of end users use cloud-based identity management, while another 24% are in the process of implementing systems.
This rise of centralised platforms for identity data, user authentication, and resource-access authorisation delivered as a service is aligned with the rise of mobile access technologies and Zero Trust goals.
Trend 6: AI in analytics
While AI has quietly been revolutionising industries for decades, the launch of ChatGPT in November 2022 thrust AI into the mainstream. In security, AI has emerged as a trend for the first time this year. Its ability to enable richer and faster insights is a key tool to drive better decision-making, and this is reflected in 44% of respondents already using AI analytics tools through third-party as-a-service offerings.
AI-powered analytics tools can identify threats automatically, reducing the amount of manual work required and improving the accuracy of threat detection by analysing patterns from vast amounts of data. It isn’t only analytics where AI is being used, though: 11% of respondents said they are using AI-enabled RFID devices, 15% are using AI-enabled biometrics, and 18% use AI to support their physical security solutions.
Securing the future
It is clear that innovation in security must not only keep pace with emerging threats, but stay ahead of them. Bad actors do not sit still, and security professionals must embrace sustainable solutions that deliver outstanding physical and digital security.
Grosvenor Technology is committed to innovation that aligns with industry trends, mitigating evolving security threats by using forward-thinking technology to keep workplaces safe worldwide." |
![](https://images.advfn.com/static/default-user.png) From January 2024, from the website of Newmark Security (NWT):-
"Security trends to watch in 2024
... Data reporting
Access control goes beyond allowing or denying entry; it’s about making informed decisions. The spotlight on data reporting in access control systems is pivotal. This involves collecting and analysing data on entry and exit patterns, user behaviours, and system activities. This data-driven approach empowers enterprises to gain insights into potential vulnerabilities, adapt to changing threats, and address security gaps.
For example, an unusual spike in access attempts during non-business hours could indicate a security threat that requires immediate attention. This trend aligns with the broader growth of big data analytics, illustrating the increasing need for solutions that go beyond securing doors to providing operational insights.
... IoT integration
The Internet of Things (IoT) has transformed access control, introducing intelligence and adaptability. In 2024, connected devices will continue to gain popularity, contributing to dynamic access management systems that stay one step ahead of security challenges.
IoT integration in access control extends beyond traditional vital cards and PIN codes. Smart devices, such as biometric scanners and mobile access applications, communicate with access control systems to provide secure and convenient entry. This interconnected ecosystem enhances security and user experience, creating a more seamless and flexible access control environment. ..."
And from January 2023, from the website of Grosvenor Technology, NWT's Human Capital Management (HCM) and access control subsidiary:-
"Key security industry trends in 2023
... 1. Artificial intelligence will continue to lead the way
According to recent figures, AI in the security market was valued at US$5.08 billion in 2020 and is expected to reach US$14.18 billion by 2026. Indeed, for several years running, artificial intelligence (AI) has been the predominant trend as companies continue to leverage its advanced capabilities for functions such as facial recognition, video surveillance, audio analytics, and more.
More recently, we have seen a shift towards AI being used as a preventative rather than a reactive measure, meaning that security teams can stop incidents taking place in the first place thanks to things like predictive analytics and machine learning.
2. Cloud-based services will become more essential
The COVID-19 pandemic accelerated the move towards cloud-based security and monitoring. According to a recent report by Calipsa, 75% of businesses surveyed said that they are now using cloud-based video analytics for security purposes, an increase of 8% when compared with 2020.
Cloud technology enables organizations to become more agile in their approach to security, putting them in a better position to respond to emerging challenges and scale their approach with organizational growth. It’s also far more adaptable than legacy security solutions. For example, cloud-based identity management technology can be integrated with the latest developments in biometric access control in real-time to enable faster and more secure authentication. ...
5. More of a focus on privacy protection
The COVID-19 pandemic had huge implications for privacy, and the use of tracking technology and other data-driven tools by governments worldwide has led to consumers being understandably more concerned about it. Given that the number one goal of any physical security solution is to protect your people and assets, you shouldn’t underestimate the role your organization now plays in building public trust.
The heightened sensitivities of the public around privacy means that the physical security industry is now having to do more to address it and find appropriate solutions. For organizations that see this as an opportunity rather than a challenge, privacy could prove to be the driving force behind forward-thinking strategies, such as privacy-first system design, and become a catalyst for further growth. ..."
Newmark Security's products and services in general, as well as protecting, also promote overall efficiency and productivity:-
"But we don’t just stop at security. We understand that every business seeks to create an environment in which it can operate more efficiently and with greater levels of productivity. That’s why we strive to provide our clients with smart, safe, and secure workspaces that not only protect their people and assets, but also promote efficiency and productivity."
Including from the advanced data insights provided by its access control (see above) and HCM (human capital management) systems:-
"The enhanced reporting and analytics that our HCM devices provide allow an organisation deeper insight into the aspects of their business that support strategic growth." |
![](https://images.advfn.com/static/default-user.png) "United Nations
World Creativity and Innovation Day 21 April
... On World Creativity and Innovation Day, the world is invited to embrace the idea that innovation is essential for harnessing the economic potential of nations. ..."
Today, i.e. World Creativity and Innovation Day 2024, is a day just made for Newmark Security - "The Innovators of Security":-
"The Innovators of Security
For over 25 years, Newmark has empowered organisations to create secure environments for their people.
We design and manufacture physical security products, intelligent access control, timekeeping, and identity management solutions delivered seamlessly through the cloud.
Listed on AIM, we consistently invest in innovation to ensure our technology meets the evolving needs of our blue-chip customers. Operating out of the UK and US, our subsidiaries Safetell and Grosvenor Technology are strategically positioned to capitalise on the rising global demand for security and data protection.
Safe. Seamless. Secure. It’s the Newmark way."
Creativity & innovation are in Newmark's DNA: and as a 'rolling' process, as they are never 'satisfied':-
"Our Strategy
Newmark Security is dedicated to addressing the major challenges facing corporations in today’s global security landscape through partnership and innovation. We dedicate significant resources to our R&D to continually stay ahead of the curve and provide the highest level of secure technologies.
As specialists in biometric technology, cloud services, and mobile authentication, we ensure it is our products that are at the forefront of the security industry. ...
Our development team are never ‘done’ ...
We offer a wide range of revolutionary products and services ..."
Newmark Security (NWT):-
"Newmark Security in 2023: A Transformed Tech & USA Success Story"
Current NWT share price 83.5p, market cap. £7.83M. |