Goldshore Expands Gold Mineralization Along Strike and at Depth at the Southwest Zone

Goldshore Expands Gold Mineralization Along Strike and at Depth at the Southwest Zone

Includes Intersects 2.17 g/t Au over 50.35m and 6.96 g/t Au over 15.05m

 

VANCOUVER, B.C., April 20, 2023 -- InvestorsHub NewsWire -- Goldshore Resources Inc. (TSXV: GSHR / OTCQB: GSHRF / FWB: 8X00) ("Goldshore" or the "Company"), is pleased to announce assay results from its recently completed drill program at the Moss Lake Project in Northwest Ontario, Canada (the "Moss Gold Project").

Highlights:

 

• Results from seven holes testing the extension of the Southwest Zone toward the Main Zone have delineated a new high-grade lens, including visible gold, northeast of the Southwest Zone resource that extends from surface to at least 250 meters depth with best intercepts of:

 

• 6.96 g/t Au over 15.05m from 189.4m depth in MMD-22-105, including
  • 54.4 g/t Au over 1.6m from 189.4m

 

• 2.17 g/t Au over 50.35m from 103.55m depth in MMD-23-114, including
  • 3.47 g/t Au over 26.05m from 120.35m

 

• 1.30 g/t Au over 21.35m from 214m depth in MMD-22-108, including
  • 2.60 g/t Au over 7.35 from 228.0m

 

 

• These drill results prove that the Southwest Zone is a continuation of the Main Zone and not a fault offset as previously interpreted. They also show that the Southwest Zone extends to depth and is potentially as large as the Main Zone.

 

• With drilling recently completed, the Company is preparing an updated mineral resource expected in May. The updated resource will use data from an additional 72 holes compared to the November 2022 resource. Mineralization in the resource area remains open in multiple directions.

 

President and CEO Brett Richards stated: "These results continue to support our belief that the size and scale of the Moss Gold Project is much larger and continues to be open at all directions, along strike both to the northeast and southwest, as well as our understanding of lateral mineralized targets to the south-east of the Southwest Zone and the Main Zone. For now, we have halted the program to step back; understand the quantum of this resource, and prepare for a mineral resource update in early May, we can now see a viable path to a meaningful project PEA (preliminary economic analysis).  We look forward to those results in the coming months, as we start to plan for an infill drilling program working towards a pre-feasibility study in the future."

Technical Overview

Figure 1 shows the location of the drill holes in this press release and Figure 2 shows a close up of the drilled area with significant intercepts. Figure 3 is a typical section through hole MMD-22-105, -108 and -109. Table 1 shows the significant intercepts. Table 2 shows the drill hole locations.

Continued infill of the Southwest Zone has delineated a new continuous high-grade structure over a 250m strike length from near surface to 200m depth immediately northeast of the historical Southwest Zone. Holes MMD-22-105, -108, -109 and MMD-23-113, and -114 intersected this structure along with previously released holes MMD-22-031, -042, -063, and -064. The newly understood zone orientation was tested against the phase 1 drill results and confirmed the continuity of the high-grade structures controlling the mineralization.

The mineralized zone occurs within an albitite+hematite altered diorite intrusion complex cut by closely spaced, texturally destructive sericite+chlorite+carbonate altered shears.  Additional shearing, and subsequent alteration, is seen extending into the neighboring intermediate volcanics but is poorly mineralized.

The gold mineralization appears more nuggety than elsewhere in the deposit with a greater portion of the mineralization attributed to pyrite±chalcopyrite bearing quartz-carbonate veins within the sheared intervals. Mineralization includes visible gold (Figure 4). Several very high-grade intercepts include:

• 54.4 g/t Au over 1.6m from 189.4m depth in MMD-22-105

 

• 11.3 g/t Au over 0.5m from 147.7m depth in MMD-22-108 and
• 11.5 g/t Au over 0.7m from 232.35m

 

• 10.6 g/t Au over 0.95m from 323.3m depth in MMD-23-112

 

• 19.0 g/t Au over 0.65m from 54m depth in MMD-23-114 and
• 22.9 g/t Au over 1m from 128m depth and
• 14.4 g/t Au over 1m from 137m depth

 

Holes MMD-22-109 and MMD-23-113 intersected the high-grade structure but encountered lesser vein mineralization resulting in more modest grade intercepts including:

• 0.44 g/t Au over 81.2m from 298.8m depth in MMD-22-109, including
  • 1.08 g/t Au over 8.60m from 335.35m

 

• 0.63 g/t Au over 29.5m from 129.55m depth in MMD-23-113, including
  • 4.76 g/t Au over 2.0m from 140.0m and
• 0.51 g/t Au over 58m from 204.0m depth, including
  • 1.92 g/t Au over 4.0m from 205.0m and
  • 1.84 g/t Au over 3.0m from 229.0m

 

Holes MMD-22-106, and MMD-23-112 were focused on infilling the drill spacing of the existing Southwest Zone. All three holes intercepted broad zones of mineralization hosted primarily within altered granodiorite containing narrow higher grade shear zones. Best intercepts include:

• 0.47 g/t Au over 63m from 277m depth in MMD-22-106

 

• 0.61 g/t Au over 41.25m from 232m depth in MMD-23-112

 

• 0.39 g/t Au over 53.5m from 301m depth in MMD-23-112

 

Pete Flindell, VP Exploration for Goldshore, said "These results show that the Southwest Zone is much larger and better mineralized than historical drillholes suggested; and is potentially as large as the Main Zone. We await the results from the final batch of assays that are expected to provide critical infill beneath the heart of the Southwest Zone."

 

Table 1: Significant downhole gold intercepts

HOLEID	FROM	TO	LENGTH (m)	TRUE WIDTH (m)	CUT GRADE (g/t Au)	UNCUT GRADE (g/t Au)
MMD-22-105	45.00	48.00	3.00	2.3	0.33	0.33
	62.00	66.45	4.45	3.5	0.34	0.34
	117.55	125.00	7.45	6.0	0.38	0.38
	189.40	204.45	15.05	12.5	3.64	6.96
including	189.40	191.00	1.60	1.3	30.0	54.4
MMD-22-106	165.00	187.00	22.00	15.7	0.33	0.33
	204.20	229.00	24.80	18.0	0.50	0.50
	256.00	263.00	7.00	5.2	0.34	0.34
	277.00	292.40	15.40	11.5	0.37	0.37
	299.20	340.00	40.80	30.9	0.59	0.59
including	325.00	335.00	10.00	7.6	1.17	1.17
	353.15	384.00	30.85	23.9	0.61	0.61
including	359.00	368.70	9.70	7.5	1.08	1.08
MMD-22-108	126.55	133.15	6.60	4.7	0.36	0.36
	143.55	168.00	24.45	17.6	0.62	0.62
including	143.55	148.20	4.65	3.3	1.99	1.99
including	147.70	148.20	0.50	0.4	11.3	11.3
	190.80	196.25	5.45	4.0	0.31	0.31
	214.00	235.35	21.35	15.9	1.30	1.30
including	215.40	218.00	2.60	1.9	1.10	1.10
and	228.00	235.35	7.35	5.5	2.60	2.60
including	232.35	233.05	0.70	0.5	11.5	11.5
	319.00	322.15	3.15	2.5	0.37	0.37
MMD-22-109	238.35	244.00	5.65	4.1	0.52	0.52
	271.00	274.00	3.00	2.2	0.37	0.37
	298.80	380.00	81.20	61.2	0.44	0.44
including	335.35	343.95	8.60	6.5	1.08	1.08
	395.10	404.65	9.55	7.4	0.39	0.39
MMD-23-112	103.35	106.85	3.50	2.5	0.38	0.38
	118.00	138.00	20.00	14.3	0.39	0.39
	179.00	182.00	3.00	2.2	0.57	0.57
	207.00	218.90	11.90	8.9	1.17	1.17
including	207.00	215.00	8.00	6.0	1.63	1.63
	232.00	273.25	41.25	31.5	0.61	0.61
	287.10	290.10	3.00	2.3	0.33	0.33
	301.00	309.00	8.00	6.3	0.32	0.32
	313.00	354.05	41.05	32.8	0.42	0.42
including	323.00	325.60	2.60	2.1	4.41	4.41
including	323.30	324.25	0.95	0.8	10.6	10.6
	368.00	370.00	2.00	1.6	0.71	0.71
	423.85	428.50	4.65	3.8	0.33	0.33
	462.00	472.75	10.75	9.0	0.56	0.56
	526.80	532.00	5.20	4.4	0.37	0.37
MMD-23-113	18.00	42.00	24.00	16.2	0.42	0.42
including	31.00	34.00	3.00	2.0	1.55	1.55
	129.55	132.00	2.45	1.8	0.41	0.41
	136.00	165.50	29.50	21.6	0.63	0.63
including	140.00	142.00	2.00	1.5	4.76	4.76
	204.00	262.00	58.00	44.5	0.51	0.51
including	205.00	209.00	4.00	3.0	1.92	1.92
and	229.00	232.00	3.00	2.3	1.84	1.84
	274.00	276.00	2.00	1.6	0.33	0.33
	289.00	291.00	2.00	1.6	0.31	0.31
	332.00	334.30	2.30	1.8	0.82	0.82
MMD-23-114	30.00	32.25	2.25	1.7	0.33	0.33
	40.65	62.65	22.00	16.3	0.78	0.78
including	54.00	54.65	0.65	0.5	19.0	19.0
	103.55	153.90	50.35	38.8	2.17	2.17
including	120.35	146.40	42.85	20.0	3.47	3.47
including	128.00	129.00	1.00	0.8	22.9	22.9
and	137.00	138.00	1.00	0.8	14.4	14.4
	183.00	189.85	6.85	5.4	0.36	0.36
Intersections calculated above a 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Shaded intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.

 

Table 2: Location of drill holes in this press release

HOLE	EAST	NORTH	RL	AZIMUTH	DIP	EOH
MMD-22-105	668,498	5,378,484	438	110°	-41°	249
MMD-22-106	668,438	5,378,379	440	126°	-50°	450
MMD-22-108	668,524	5,378,519	437	125°	-50°	450
MMD-22-109	668,466	5,378,591	427	125°	-51°	501
MMD-23-112	668,172	5,378,186	443	125°	-50°	600
MMD-23-113	668,494	5,378,469	438	126°	-50°	450
MMD-23-114	668,533	5,378,424	428	123°	-44°	402

 

Analytical and QA/QC Procedures

All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish ("Au-AA23") and 48 pathfinder elements via ICP-MS after four-acid digestion ("ME-MS61"). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish ("Au-GRA21"). 

In addition to ALS quality assurance / quality control ("QA/QC") protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program.  The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.

About Goldshore

Goldshore is an emerging junior gold development company, and owns 100% of the Moss Gold Project located in Ontario. Wesdome is currently a large shareholder of Goldshore with an approximate 22% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Gold Project through the next stages of exploration and development.

 

Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.

 

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

For More Information – Please Contact:

 

Brett A. Richards

President, Chief Executive Officer and Director

Goldshore Resources Inc.

 

P. [phone]   M. [phone]

E.  [e-mail]

W. www.goldshoreresources.com

Facebook: GoldShoreRes  |   Twitter: GoldShoreRes | LinkedIn: goldshoreres

Cautionary Note Regarding Forward-Looking Statements

This news release contains statements that constitute "forward-looking statements." Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company's actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements.  Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends," "estimates," "projects," "potential" and similar expressions, or that events or conditions "will," "would," "may," "could" or "should" occur.

 

Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, the release of an updated mineral resource estimate and preliminary economic assessment, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company's business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company's securities, regardless of its operating performance; and the impact of COVID-19.

 

The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change.