2012 Phase 2 Drill Results at Amerix's Limao Gold Property, Brazil

Amerix Precious Metals Corp. (TSX VENTURE:APM)(FRANKFURT:NJGN) ('Amerix' or 'the
Company') is pleased to report assay results from the Company's 2012 Phase 2
diamond drill program at the 100% owned Limao Gold Property located in the
Tapajos Gold Province, Para State, Brazil. Six additional holes (LDH-15 to
LDH-20) totaling 716 metres were drilled in November and December 2012 at the
Limao Pit target area to follow up on the results reported earlier in 2012 from
the Phase 1 drill program. (See the Company website at www.amerixcorp.com for
news releases and project drill results from 2012).


"We are encouraged by the discovery of a second lens of significant gold
mineralization at Limao. This discovery confirms our view that Limao has the
potential to host multiple lenses. With several gold-in-soil anomalies
identified across the Company's extensive land holdings, Amerix will be
preparing priority targets for drill testing," stated Steve Brunelle, President
and CEO.


The Phase 2 drilling program had two objectives;



1)  to step across a steeply dipping, northeast trending dyke encountered in
    earlier hole LDH-05 and test the near surface extension and potential   
    continuity of gold mineralization to the east, and                      
2)  to test the extension of the gold mineralization further to the west    



Drill holes LDH-15, 16, 19 and 20 have been drilled on the southeast side, and
across the northeast trending dyke that was defined earlier in LDH-05. Holes
LDH-15, 16 and 19 were all collared from the same location as earlier hole
LDH-14 that intercepted 9.03 metres grading 21.12 grams gold per tonne. Company
geologists believe that a second lens-like zone of gold mineralization has now
been intersected in holes LDH-14, and LDH-20 with a yet unknown width and
orientation.


Drill hole LDH-15 was drilled at azimuth 000 and -45 degrees and has intersected
from 84.1 to 87.7 metres, 3.6 metres averaging 1.24 grams gold per tonne, from
89.2 to 90.35 metres, 1.15 metres averaging 1.60 grams gold per tonne, and from
101.66 to 104.2 metres, 2.54 metres averaging 1.07 grams gold per tonne. Drill
hole LDH-16 was drilled at azimuth 020 and -55 degrees, drilling vertically
above the gold intersection in LDH-14 and did not encounter the mineralized
zone. Drill hole LDH-19 was drilled at azimuth 034 and -67 degrees, drilling to
the east of the gold intersection in LDH-14 and did not encounter significant
gold mineralization. Drill hole LDH-20 was collared east of the Limao Pit, and
drilled at azimuth 265 and -67.5 degrees and has intersected from 102.75 to
106.46 metres, 3.71 metres averaging 48.09 grams gold per tonne and from 109.79
to 112.15 metres, 2.36 metres averaging 2.91 grams gold per tonne.


Drill holes LDH-17 and LDH-18 have been drilled at the western margin of the
Limao Pit. These were short (50 metre) holes that targeted the western
projection of the gold mineralization near surface. Neither hole intersected
significant gold mineralization. These results indicate the western margin of
the lens of gold mineralization encountered in holes LDH-01, 02, 03, 04, 11 and
13. (See Table 1 below for a summary of all Phase 1 and Phase 2 drill results).
It appears to the Company's geologists that the gold mineralization tested on
the west side of the dyke is trending at 110 degrees and plunging to the
southeast.


Click on the link below to view the plan view map of the drill holes in Figure 1:

http://www.rmcommunicationsinc.com/snapmail/img/file20130114104756.pdf

All drill results from the Limao Pit (Phase 1 and Phase 2) are presented in
Table 1 below.




                                   Table 1                                  
----------------------------------------------------------------------------
Hole #               From (m)         To (m)     Interval (m)     Gold (g/t)
----------------------------------------------------------------------------
(i)LDH-01               28.33          41.00            12.67          14.04
----------------------------------------------------------------------------
(i)LDH-02               36.60          77.00            40.40           3.51
----------------------------------------------------------------------------
(i)LDH-03               25.95          49.55            23.60           6.35
----------------------------------------------------------------------------
(i)LDH-04               34.31          44.20             9.89          8.209
----------------------------------------------------------------------------
(i)LDH-05                                 NE dyke                           
----------------------------------------------------------------------------
(i)LDH-10                  N.S.A. - below zone of mineralization            
----------------------------------------------------------------------------
(i)LDH-11               27.85          42.23            14.38          53.85
----------------------------------------------------------------------------
(i)LDH-12              104.11         106.78             2.67           1.41
----------------------------------------------------------------------------
(i)LDH-13               21.89          27.63             5.74           6.95
----------------------------------------------------------------------------
(i)LDH-14               94.19         103.22             9.03          21.12
----------------------------------------------------------------------------
LDH-15                  84.10          87.70             3.60           1.24
----------------------------------------------------------------------------
                        89.20          90.35             1.15           1.60
----------------------------------------------------------------------------
                       101.66         104.20             2.54           1.07
----------------------------------------------------------------------------
LDH-16        N.S.A                                                         
----------------------------------------------------------------------------
LDH-17        N.S.A.         Western margin                                 
----------------------------------------------------------------------------
LDH-18        N.S.A.         Western margin                                 
----------------------------------------------------------------------------
LDH-19        N.S.A.                                                        
----------------------------------------------------------------------------
LDH-20                 102.75         106.46             3.71          48.09
----------------------------------------------------------------------------
                       109.79         112.15             2.36           2.92
----------------------------------------------------------------------------
                  (i)Drill Hole results reported previously                 



At the Limao Pit, drilling has intercepted gold mineralization hosted in
pyritized, strongly potassic altered monzogranites, syenogranites and syenites.
Potassic alteration in the complete rock package is variable. These rocks show
little deformational fabric and the pyrite occurs in disseminations, clots and
along fractures. Other, less abundant sulphides include chalcopyrite, bornite
and bismuth bearing sulphides. The style of gold mineralization can be seen in
drill core photos that are posted at the Company's website for each drill hole.


High grade lenses of gold mineralization at the Limao Pit have been encountered
in drilling on both the east and west sides of the northeast trending dyke. The
true width of the gold mineralization on the west side of the dyke that was
drilled in holes LDH-1, 2, 3, 4, 11, and 13 is estimated to be 5 to 12 metres
contained in an irregular, tabular lens that trends and plunges steeply to the
east. Holes LDH-12, 14, 15, and 20 have outlined mineralization on the east side
of the dyke where correlation of mineralization is presently uncertain.


Company geologists believe the high grade gold mineralization encountered at the
Limao Pit may be spatially related to the northeast trending dyke and regionally
related structures that crosscut the northwest trend of the Tapajos rock
assemblage. These same structures may have been the conduits for the alteration
and mineralizing events that led to the existence of the present gold
mineralization at the Limao Pit. Additionally, anomalous gold mineralization has
been intersected coincident with the dyke indicating remobilization of gold.
There exists the potential of a separate target for gold mineralization
occurring in these northeast structures, as evidenced by the gold intercepts
coincident with the dyke in LDH-03 and LDH-15.


Amerix is encouraged by the high grade nature of the gold mineralization
intersected in the 2012 drilling at the Limao Pit. Gold-in-soil geochemical
surveying described in Company News Release 2012-08 of June 7, 2012, has
outlined a 600 metre long anomaly that extends southeast from the Limao Pit that
is characterized by subtle clusters of gold anomalies. The Company has drill
tested only a small segment of this anomaly (150 metres) and this remains a high
priority target for further drilling.


To view Central Grid: Limao Pit, Au (ppb) in Soil Results Figure, click on the
link below:


http://www.rmcommunicationsinc.com/snapmail/img/file20130117105506.pdf

Amerix continues its geochemical surveying at the extensive (18,000 hectare)
Limao land package. A drill target has been outlined at the Jambu Zone, located
800 meters to the northwest of the Limao Pit. This is a northwest trending
gold-in-soil anomaly with approximate dimensions of 340 metres by 225 metres
(See News Release 2012-04, April 2, 2012). Several other grids have been
extended to follow anomalous gold-in-soil trends, particularly at the Northern
Grid and the South Grid where Phase 1 drilling intersected gold mineralization
in shear hosted veins as in LDHM-06 and LDHM-09 (See News Release 2012-12,
September 5, 2012). To the west, at the adjoining Serra Dourada property, stream
sediments and artisanal workings along drainage systems are being sampled, as
well as, grid oriented soil geochemical surveys. Targets are being prioritized
for follow up work to prepare for drill testing.


Diamond drilling at Limao is accompanied by a quality assurance and quality
control program that is managed by Amerix's geologists and includes industry
standard documentation during data collection, reporting, and down hole azimuth
and angle surveys. Drill core sample intervals were selected based on geological
and mineralogical changes in the rock and averaged near 1 metre sample length
within mineralized intervals and the immediate wall rock using sample lengths
that ranged from a minimum of 0.5 metres to a maximum of 1.5 metres. NTW size
rock drill core was split in half using a diamond saw preserving half of the
split core for reference and half to be sent for gold analysis. Standard
references, blanks, and quartered drill core duplicates were also inserted into
the sample stream prior to transport. All samples were delivered to Acme
Laboratories preparation facility in Itaituba, Brazil where the samples were
crushed, pulverized, split, and shipped to Acme's Santiago, Chile laboratory for
fire assay gold on a 30 gram split. Samples analyzing greater than 10 grams per
tonne gold, or over the fire assay detection limit, were automatically
re-analyzed for gold by gravimetric gold analysis. Both Acme Itaituba and Acme
Santiago are registered under International Standards Organization's ISO
9001:2008 quality control program. The Company utilizes a chain of custody
program overseen by its geologists concerning sample transport from the Limao
property to Acme's Itaituba preparation facility.


Mr. Ryan Grywul, P. Geo., and Vice President, Corporate Development for Amerix,
and a qualified person as defined in National Policy 43-101 is responsible for
all technical information contained in this news release.


About Amerix Precious Metals Corporation

Amerix Precious Metals Corporation is an Ontario company, managed by an
experienced team, exploring for precious metals in Brazil. Amerix's objective is
to create value for shareholders through the delineation and expansion of
bedrock gold resources, and realization of value from placer and tailings gold
resources at the Company's properties. Brazil has significant gold potential and
is a proven mining-friendly country. Amerix will continue to seek exploration
properties of merit via staking, acquisition or merger. The Company's shares
trade on the TSX Venture Exchange under the symbol "APM" and at the Frankfurt
Stock Exchange under the symbol "NJGN". 


Disclosure Regarding Forward-Looking Statements: This press release contains
certain "Forward-Looking Statements" within the meaning of applicable securities
legislation. All statements, other than statements of historical fact, included
herein are forward-looking statements that involve various risks and
uncertainties. There can be no assurance that such statements will prove to be
accurate, and actual results and future events could differ materially from
those anticipated in such statements. Important factors that could cause actual
results to differ materially from the Company's expectations are disclosed in
the Company's documents filed from time to time with the TSX Venture Exchange
and, among others, the Ontario Securities Commission as well as under the
heading "Risk Factors" in the Management Discussion and Analysis.


FOR FURTHER INFORMATION PLEASE CONTACT: 
Amerix Precious Metals Corporation
Steve Brunelle
President and Chief Executive Officer
647-260-0470
[e-mail]


Amerix Precious Metals Corporation
Dan Hamilton
Chief Financial Officer
647-260-0470
[e-mail]
www.amerixcorp.com