Shear Announces Work Plan for the Jericho Project

Shear Diamonds Ltd. (TSX VENTURE:SRM) announces the 2011 work plan with an
approved $4.6 million Phase 1 budget for its Jericho Diamond Project, Nunavut.
At site, a five-person crew was mobilized to prepare the facilities the spring
drilling program planned to commence in early April.


Shear has identified three main exploration and development priorities for 2011: 



--  To prove-up and expand the current resource at the Jericho kimberlite
    complex, 
--  To explore for new diamondiferous kimberlites proximal to the Jericho
    mine, and 
--  To begin work on determining if Jericho is economically feasible with a
    new National Instrument 43-101 resource for Jericho and any additional
    nearby kimberlites. 



In addition, Shear is focusing on the renewal of its water license and other
permits, leases and regulatory instruments.


"Our entire team at Shear has worked very hard these past months to design and
develop the strategies needed to best understand and upgrade the known resources
at Jericho. We will also be exploring to identify further resources at Jericho
and the surrounding claims which host targets of significance" said Pamela
Strand, President and CEO. "We have designed the exploration program with
important milestones and goals that we believe are attainable within the next
12-18 months."


"The purchase of the Jericho Diamond Mine was a company transforming
acquisition. However, that was just the beginning," said Julie Lassonde,
Executive Chairman of Shear. "The past few months since the acquisition have
been extremely busy with planning and the sourcing and hiring of the best people
for the Shear team. The scope of this year's various programs demonstrates the
significant work needed to fully understand the Jericho kimberlite complex and
area. We at Shear are looking forward to an important and pivotal year." 


As a result of a comprehensive ongoing data compilation and interpretation of
the historic data from Jericho and the surrounding area, experienced crews will
integrate all aspects of the Jericho dataset to assist in determining
perspective targets. Details of the Phase 1 approved exploration program (until
end of June) will include:




--  Ground magnetic and electromagnetic surveys with selected ground gravity
    surveys over priority geophysical targets, many with indicator mineral
    anomalies, 
--  Approximately 5,000 m of core drilling to test: 
    --  Up to five new exploration targets suggestive of new kimberlites, 
    --  12 angled exploration holes within the Jericho kimberlite complex to
        test for additional tonnage and to firm up the volume model, and 
    --  2,500m of vertical pilot holes within the Jericho kimberlite for
        geological modeling, 
--  Till sampling, prospecting and structural interpretation targeting high
    interest areas, 
--  Ongoing care & maintenance of the site, and, 
--  Ongoing evaluation of the Jericho resource, as detailed below. 



Jericho Resource Study Update

Shear has engaged the services of Mineral Services Canada Inc ("MSC") of North
Vancouver, BC to assist in the development of a new geological model for
Jericho. MSC are widely recognized as expert consultants to the diamond
exploration industry. MSC was involved with Shear previously and were
instrumental in assisting Shear in pinpointing its exploration priorities at the
Churchill Diamond Project. Today, Churchill has one of the largest distribution
of known kimberlites in Canada.


The Jericho resource estimate, provided in the July 2010 National Instrument
43-101 technical report authored by SRK Consulting (Canada) Inc. (the "SRK
Report") (see Shear's press release on July 22, 2010) provided an indication of
the potential for a viable mining project at Jericho. The SRK Report included an
estimate for Jericho of 1,773,000 tonnes indicated and 1,724,000 tonnes inferred
resources. The indicated resources have been categorized on the basis of all
then available sampling data, including samples collected during the years of
Tahera's production along with general production data, and taking into account
further SRK's experience and observations at Jericho between 1999 and 2010.
Following a comprehensive review of available historic mining and resource
evaluation records, a number of recommendations that largely echo those made in
the SRK Report have been made with a view to increasing Shear's level of
certainty associated with the current Jericho resource. 


The Jericho kimberlite is internally complex with a degree of geological and
associated grade variability. As a result, the SRK Report recommended that
further drilling and investigation into all data, including sampling, geology
and processing/metallurgical characteristics, to be done in order to allow for a
future production decision.


Shear's work plan is intended to establish the full tonnage potential and
recoverable diamond grade of the Jericho complex at a level of confidence
sufficient to provide a basis for an economic assessment of project viability.
Shear's work plan will focus firstly on firming up the geological model to
better constrain the extent of the resource and the degree of continuity within
different portions of it; secondly on representative sampling of the Jericho
resource; and thirdly on evaluating mineral processing options for improving
diamond recovery.


The resource work will encompass the following:



--  Geological review: re-logging available historic drill core supported by
    systematic petrographic analysis for a preliminary assessment of the
    internal geology. This will be undertaken as part of Phase 1. 
--  In-pit delineation core drilling (12 holes, 2,000m) to better understand
    and define areas below the current pit floor that lack definitive
    constraints on the kimberlite/country rock contacts. This drilling will
    provide the required confidence for kimberlite tonnage modelling, as
    well as advance the internal geological modelling. All of these holes
    are approved for Phase 1. 
--  Large diameter reverse circulation drilling (approx.22 holes) and
    sampling (total sample size of approximately 1,000 tonnes) to provide
    spatially representative grade data for the major resource domains.
    Prior to the large diameter drilling, pilot core holes will be completed
    for detailed geological and geotechnical information. Eleven pilot holes
    totalling 2,500m of drilling are approved for Phase 1. 
--  Geological interpretation, geology and diamond grade modelling and
    updated resource estimation. 
--  Ore dressing studies on stockpiled kimberlite material to determine the
    optimal processing strategy for diamond recovery. 



Preliminary results of diamond size-frequency analysis by MSC of available
microdiamond and bulk sampling / production data for Jericho provides support
for the results of recent tailings audit work (see Shear's press release on Feb
8, 2011) indicating a significant loss of diamonds during historical production.
To the extent that recovery efficiency can be improved, this represents
significant upside on potential recoverable grade. Further work will be
undertaken to better quantify the nature and extent of diamond loss as well as
the potential for mitigating this in a future production plant.


Once results from the Phase 1 program have been received and interpreted, Shear
will be able to finalize the scope and budgets for the next phase. Shear has
more than sufficient resources to complete Phase I of its work plan. 


About Shear Diamonds

Shear is a Canadian-based company focused on diamond exploration and development
in Canada's North, where it explores established diamond districts and has
discovered new ones. Shear currently has a portfolio of eight diamond projects,
including three advanced projects with development potential. Shear holds a 100%
interest in its recently acquired Jericho Diamond Mine and surrounding
exploration assets, located in the Kitikmeot region of Nunavut. Jericho is
Nunavut's first and only diamond mine.


Pamela Strand, P. Geol., Shear's President and Chief Executive Officer, and
Jennifer Burgess, P. Geol. Shear's VP Exploration, are qualified persons for
purposes of National Instrument 43-101 who supervised the preparation of the
information forming the basis for this press release. 


On behalf of the Board of SHEAR DIAMONDS LTD.

Pamela Strand, P. Geol., President & CEO 

Julie Lassonde, Executive Chairman

This news release may contain forward looking statements, being statements which
are not historical facts, including, without limitation, statements regarding
potential mineralization, exploration results, resource or reserve estimates,
anticipated production or results, sales, revenues, costs, "best-efforts"
financings or discussions of future plans and objectives. There can be no
assurance that such statements will prove accurate. Such statements are
necessarily based upon a number of estimates and assumptions that are subject to
numerous risks and uncertainties that could cause actual results and future
events to differ materially from those anticipated or projected. Important
factors that could cause actual results to differ materially from Shear's
expectations are in its documents filed from time to time with the TSX or the
TSX Venture Exchange and provincial securities regulators, most of which are
available at www.sedar.com. Shear disclaims any intention or obligation to
revise or update such statements.