We could not find any results for:
Make sure your spelling is correct or try broadening your search.
Share Name | Share Symbol | Market | Type | Share ISIN | Share Description |
---|---|---|---|---|---|
Zambezi Res | LSE:ZRL | London | Ordinary Share | BMG988411028 | ORD 1P |
Price Change | % Change | Share Price | Bid Price | Offer Price | High Price | Low Price | Open Price | Shares Traded | Last Trade | |
---|---|---|---|---|---|---|---|---|---|---|
0.00 | 0.00% | 1.25 | 0.00 | 01:00:00 |
Industry Sector | Turnover | Profit | EPS - Basic | PE Ratio | Market Cap |
---|---|---|---|---|---|
0 | 0 | N/A | 0 |
RNS Number : 1315H Zambezi Resources Ltd 31 October 2008 31 October 2008 Zambezi Resources Limited ("Zambezi" or "the Company") September 2008 Quarterly Report HIGHLIGHTS FOR THE QUARTER COPPER PROJECTS Cheowa - Glencore JV * Deep Diamond Drilling at CC2 demonstrates mineralisation continues to depths of at least 500m. Drilling is now complete. * New results from CC2 include: 1.0m at 1.36% copper and 8.89g/t gold from the 200m - 400m panel 4.25m at 2.62% copper from the 200m - 400m panel 4.0m at 1.49% copper from the 200m - 400m panel 6.0m at 1.11% copper from the 200m - 400m panel 2.0m at 1.78% copper from the 200m - 400m panel Kangaluwi * Kangaluwi drilling continues to return substantial mineralised widths in multiple zones including: 13m at 2.36% copper, 15m at 1.47% copper, 9m at 1.79% copper. * Mineralisation remains open along strike and at depth with a total strike of 4km now tested by drilling. * Chisawa RC drilling returns substantial mineralised widths in multiple zones including: 12m at 1.36% copper, 14m at 1.52% copper, 18m at 1.3% copper. * Total strike tested at Chisawa during the quarter is 4.1km with mineralisation persistent along total strike tested. Mineralisation remains open both along strike and at depth. URANIUM PROJECTS Lithic Uranium JV identifies first in-situ uranium bearing mineral davidite at several trench locations and in drilling at Oryx. Trench results return; 3m at 642ppm U3O8, 1m at 839 ppm U3O8, 3m at 292 ppm U3O8 CORPORATE During the quarter the Company raised A$1.2m through a rights issue where 9,690,895 shares and 3,230,214 listed options were issued. As a result the Company now has 197,876,174 shares on issues and 3,230,214 listed options exercisable at 19 cents that are quoted on the ASX. The rights issue was targeted to raise A$4 million at a price that was then 25% below the prevailing Zambezi share price and would have raised sufficient funds to see the Company complete the 2008 revised drill programs and provide working capital for the next 18 months. However, as a result of the decline in the share price the Company has been unable to place the 71% shortfall as had originally been envisaged. As a result, the financial situation of the Company has deteriorated substantially and has been exacerbated by the decline in global equity markets and the copper price. Strategic Review As announced on 31 July 2008, the Company ceased all drilling operations bar one drill rig that continued to drill targets at the Company's flagship Kangaluwi Project. This arrangement expired on the 15 September 2008 at which stage the last drill rig was demobilised. As a result of the strategic review the Company retrenched 26 non professional staff in August and seconded 8 geologists to work for other companies in the Sub Saharan African region. OPERATIONS During the Quarter ended 30 September 2008, further significant progress was made on the Company's priority Zambian projects. Drilling was completed at the Cheowa, Mulofwe and Kangaluwi Copper Projects. Further encouraging assay results were received for both the Cheowa and the Kangaluwi Copper Projects. Results are still pending from drilling completed on the Kangaluwi Copper Project and the Mulofwe Project with 17,800 analytical results still awaited. As a result of the Company's financial situation, all assay samples were put on hold as of the 15th September 2008. To ensure that improved sample turnaround times are maintained, the Company previously announced that it had entered into a Memorandum of Understanding with a world-leading analytical services company to install and manage a dedicated sample preparation facility in Lusaka. Installation of this facility is underway and was expected to be operational in Q4 2008. The analytical services company has however decided to establish the operation as a stand alone facility in an adjacent building to Zambezi's warehouse facilities in Lusaka. This is deemed to be an ideal situation for Zambezi. COPPER PROJECTS Cheowa - Glencore JV At the Cheowa Copper-Gold Project, where Glencore International AG ("Glencore") is earning an initial 51% interest by spending US$10 million, the Company continued drilling in Q3 with two diamond drilling rigs. Joint Venture partners Glencore and Zambezi have agreed to combine the Cheowa and Chongwe Copper Belt ("CCB") joint ventures into a single joint venture. To earn a 51% interest in the original Cheowa and CCB joint ventures, Glencore had to spend US$10 million and US$6 million respectively, for a total of US$16 million. In the period to 30 September 2008, Glencore have collectively spent US$15.6m and are expected to reach the 51% threshold on both projects in the December 2008 quarter To date, 18,500m of a deep drilling program testing the 200-400m and 400-800m vertical depth panels at the CC2 prospect has been completed, with 2,024m completed during the quarter, as part of the objective of building the Cheowa resource inventory towards 10 million tonnes. This drilling includes a suite of holes to provide samples for further metallurgical testwork. Assays are awaited, but visible mineralisation intersected to date is consistent with that previously reported throughout this panel. A Prefeasibility study is underway for the Cheowa Project with results for metallurgical testwork still pending. These results are expected in Q4 2008. The Company has focussed its attention on CC2 which is perceived to be the most highly mineralised zone within an overall corridor of up to 14km. The Mineral Resource estimate has been completed in accordance with the 2004 JORC Code for CC2, with an Indicated Resource of 3.5mt @ 1.1% copper and 0.23g/t gold and an Inferred Resource of 2.9mt @ 1.1% copper and 0.38 g/t gold (Table 1). This remains unchanged from the previous quarter pending the receipt of assay results. Table : Mineral Resource Estimate, Cheowa Copper Gold Project1 Tonnes2 Cu3 % Au4 (g/t) Copper (t) Gold (oz) Indicated Resource CC2 3,545,000 1.14 0.23 40,000 26,000 Inferred Resource CC2 2,961,000 1.12 0.38 33,000 36,000 TOTAL 6,506,000 1.13 0.30 73,000 62,000 1 Glencore earning 51%; 2 SG 2.35 for oxide zone, 2.71 for transition zone, 2.81 for fresh rock; 3At a lower cut of 0.3% copper, and a top cut of 7.3% copper; 4Reported within the comparable copper volume, top cut of 2.3 g/t gold. The 200m-400m panel at CC2 has now been tested with 51 diamond holes. The results of this drilling will be used for an updated resource in Q4 2008. Joint Venture partners Glencore and Zambezi have agreed to combine the Cheowa and Chongwe Copper Belt ("CCB") joint ventures into a single joint venture. To earn a 51% interest in the original Cheowa and CCB joint ventures, Glencore had to spend US$10 million and US$6 million respectively, for a total of US$16 million. In the period to 30 September 2008, Glencore have collectively spent US$15.6m and are expected to reach the 51% threshold on both projects in the December 2008 quarter. Table : Cheowa Project Diamond Drill Hole Assay Results Q3 Drillhole Coordinates Collar Dip Azi Total From To Interval Cu Au Elevn. Depth (m) (m) Width % g/t (m) (m) E N CHEDD0114 729391 8267090 1086 -55 159.5 323 243.00 252.00 9.00 0.84 0.05 CHEDD0125 729391 8267091 1086 -50 159.5 350 284.30 285.00 0.70 1.46 0.12 CHEDD0129 728795 8266700 978 -64 161.5 280 248.75 253.00 4.25 2.62 0.94 CHEDD0135 728429 8266532 1033 -55 159.5 250.20 232.00 236.00 4.00 1.49 0.26 CHEDD0145 728630 8266614 972 -70 159.5 308.5 259.00 265.00 6.00 1.11 0.33 CHEDD0145 728630 8266614 972 -70 159.5 308.5 273.00 275.00 2.00 1.78 0.35 All reported intercepts are from CC2; Coordinate system Arc50 UTM Zone 35S. Mineralised intervals calculated on basis of lower cutoff of 0.3% Cu, minimum mineralised interval of 0.5m, maximum internal waste of 1m. Mineralised intervals >3m% copper reported here. No cut applied to gold values. At CC2, mineralisation dipping to north at 50-55 degrees. Mineralised widths reported on downhole basis, true width approximately downhole width x 0.9 . For all other prospects, mineralised widths reported on downhole basis, true widths not yet established., CHEDD prefix denotes diamond drillholes. Kangaluwi : 100% Zambezi The greater Kangaluwi Project Kangaluwi Copper Project (PL 214) consists of the Kangaluwi, Chisawa, Imboo and Kalulu prospects and a number of as yet named targets. The project covers an area of approximately 18km by 8km as defined by surface geochemical sampling, although the interpreted mineralised structure extends beyond the boundaries of the currently defined project area. The current Kangaluwi area covers 7% of the Zambezi Prospect PL214. The Company will reduce the tenement area by 50% and has lodged renewal notice for another two years on PL214. Zambezi has carried out extensive Heli-bourne Radiometric, Magnetic and VTEM surveys over the area over the past two years having initially carried out detailed ASTER interpretation four years ago. The Company thus has a detailed structural understanding of the project where mineralisation is believed to be structurally controlled. There are also a number of gold prospects within the project which are now considered of secondary importance to the more consistent copper prospects. The Company has to date spent approximately US$ 15 million on the Zambezi tenement, two thirds of the expenditure targeting the copper Projects. To date approximately 51,000 metres of RC and diamond holes have been completed on the greater Kangaluwi prospect. RC drilling carried out in 2006, 2007 and 2008 has returned significant copper mineralisation over substantial widths in multiple zones. Results include 18m at 1.42% copper from 114m, 17m at 1.24% copper from 49m, 10m at 1.97% copper from 30m and 18m at 0.63% copper from surface. Diamond drilling carried out in 2007 and 2008 has confirmed down dip continuity of mineralisation (Table 4). Results include 19.2m at 1.14% copper from 92m, 8.07m at 2.98% copper from 145.34m, 6.14m at 1.29% copper from 157.68m, 7.32m at 1.40% copper from 161m, 5.46m at 1.66% copper from 108.54m, and 6.43m at 1.02% copper from 125.98m. Drillhole assay results are tabulated in Tables 3 and 4. Two other prospects within the Kangaluwi Copper Project, Chisawa and Kalulu were tested by limited drilling in 2006 and 2007, respectively. During 2008 Chisawa and Kalulu were drilled at nominal 200m spaced RC traverses on 100m centres. Limited drilling was carried out at the new Imboo prospect on 200 x 100m centres to cover a strike of 0.7km. Initial results suggest that mineralisation at these prospects is similar to that encountered at the Kangaluwi Prospect. To 30 September 2008, 71 RC holes for 17,058m, and 18 diamond holes for 5,372m were completed for a total of 17,058m at the Kangaluwi Prospect, 63 RC holes were completed for a total of 10,011m at the Chisawa Prospect, 20 RC holes were completed for a total of 2560m at the Kalulu Prospect and 4 RC holes for a total of 360m at the Imboo Prospect. Total drilled metres for the Kangaluwi Copper project for 2008 is 29,989m. 12,155m of this total was drilled in Q2 with the remaining 17,834m drilled in Q3. The majority of assay results for drilling at Chisawa, Kalulu and Imboo are still pending. Results have been received for one diamond hole of eighteen for the Kangaluwi Prospect with the remainder still pending. These diamond holes test the deeper extents of zones identified by RC drilling at the Kangaluwi Prospect in 2006, 2007 and 2008. A 2004 JORC compliant resource estimate for the Chisawa and Kangaluwi Prospects is expected in Q4 2008. Mineralisation at Kangaluwi Prospect consists of chalcopyrite, bornite, malachite and azurite with chalcopyrite being the dominant ore mineral in fresh rock at depth. The host rocks consist of sheared and brecciated metasediments and metavolcanics. Mineralisation dips moderately to the south west at approximately 30-40o and occurs within the sheared northern limb of an overturned ESE- plunging regional synformal fold. Mineralised zones average approximately 10m in thickness, with some broader zones of up to 32m in thickness. Drilling also suggests the potential for multiple mineralised zones which broaden at depth. A total strike extent of 4.0 km has now been tested by drilling. The prospect still remains open along strike and at depth. Preliminary metallurgical testwork on composite 2007 drill core from Kangaluwi has indicated favourable metallurgical characteristics. The ore is relatively soft with a Bond Mill Work Index of 11.5 kWhr/t, and a Rodmill Work Index of 8.9 kWhr/t. This is based on a single composite test. The first rougher flotation test showed recoveries in excess of 95% copper and silver which are the only metals expected to be of economic value for the Kangaluwi Project. Samples have been collected and dispatched for more comprehensive metallurgical testwork during Q3 with results expected in Q1 2009. At the Chisawa and Kalulu Prospects, broad, consistent zones of malachite, azurite, chalcocite, chalcopyrite and bornite mineralisation have been intersected to depths of 150m in widths exceeding 10m and 6m respectively.. Results for the quarter are tabulated in table 3. Broader mineralised zones were intersected at Chisawa with widths of up to 32m. Zoning exists with bornite and chalcopyrite becoming dominant at depth. Rare sphalerite occurs as inclusions in copper sulphides in fresh rock. Mineralisation is hosted predominantly in garnetiferous quartz - muscovite - biotite schist and surficially in felsic pegmatitic intrusives concordant with stratigraphy. The overall strike tested in Q3 is 4.1km at Chisawa and 1.3km at Kalulu with mineralisation remaining open along strike and at depth at both prospects. Results are still pending but visual estimations show continuity and strong tenure of mineralisation along the entirety of the 4.1km of strike drilled at Chisawa. At the new Imboo Prospect 0.7km of strike was tested revealing zones in excess of 4m in width containing disseminated copper mineralisation in the form of chalcopyrite and bornite at depth with malachite near surface. Host lithology at Imboo is an altered amphibolitic gabbro. Results are pending. Table : Chisawa Prospect RC Drill Hole Assay Results Q3 Drillhole Coordinates Collar Dip Azi Total From To Interval Cu Elevn. Depth (m) (m) Width % (m) (m) E N CHSRC0024 788775 8286590 679 -50 37 187 122 134 12 1.36 CHSRC0026 788780 8286874 676 -50 79.5 120 22 35 13 0.73 CHSRC0027 788580 8286837 694 -50 79.5 220 178 192 14 0.88 CHSRC0028 788640 8287054 667 -50 79.5 114 85 99 14 1.52 CHSRC0030 787693 8287989 698 -50 36.5 150 48 66 18 1.3 CHSRC0034 788592 8287191 676 -50 37 120 76 81 5 1.43 CHSRC0036 788533 8287109 675 -50 37 155 128 133 5 1.19 Table : Kangaluwi Copper Project - RC and Diamond Drill Hole Assay Results Q3 Drillhole Coordinates Collar Dip Azi Total From To Interval Cu Elevn. Depth (m) (m) Width % (m) (m) E N KNGRC0120 786387 8290274 673 -50 354.5 160 128 131 3 1.12 KNGRC0132 786485 8290316 684 -50 354.5 171 65 71 6 0.55 KNGRC0134 786484 8290271 683 -50 354.5 123 104 111 7 0.86 KNGRC0139 787440 8289996 705 -50 354.5 120 115 117 2 2.86 KNGRC0142 787590 8289858 724 -50 354.5 186 141 143 2 1.73 148 150 2 1.69 KNGRC0145 787541 8289946 719 -50 354.5 141 95 99 4 1.15 KNGRC0146 787643 8289897 736 -50 354.5 150 118 125 7 0.95 KNGRC0148 787691 8289916 747 -50 354.5 150 96 102 6 1.39 KNGRC0149 787537 8290043 720 -50 354.5 100 37 46 9 1.79 KNGRC0150 787641 8289820 727 -50 354.5 183 158 169 11 0.9 176 183 7 0.5 KNGRC0151 787539 8289995 719 -50 354.5 120 66 69 3 2.58 KNGRC0152 787689 8289870 740 -50 354.5 183 125 130 5 1.35 134 138 4 2.66 KNGRC0154 787740 8289902 750 -50 354.5 170 90 96 6 0.71 KNGRC0155 787591 8289939 728 -50 354.5 150 98 102 4 1.76 105 108 3 1.31 127 129 2 1.67 KNGRC0156 787692 8289772 719 -50 354.5 250 160 171 11 2.73 KNGRC0161 787792 8289734 717 -50 354.5 200 159 168 9 0.45 173 177 4 1.03 Coordinate system Arc50 UTM Zone 35S. Mineralised intervals calculated on basis of lower cutoff of 0.3% Cu, minimum mineralised interval of 0.5m, maximum consecutive internal waste of 2m. All intervals reported here based on aqua regia digest, ICP-OES analysis. Mineralised intervals >3m% copper reported here. Mineralisation dipping to south at approx 35 degrees. Mineralised widths reported on downhole basis, true width approximately downhole width x 0.98. Azimuths reported on magnetic grid, UTM grid north = 354.5 degrees magnetic. KNGRC prefix denotes RC drillholes, KNGDD prefix denotes diamond drillholes. * denotes reported subsequent to the Quarter. GOLD PROJECTS No work was carried on the Company's gold projects during the quarter. URANIUM PROJECTS Zambezi has two uranium joint ventures, one with Lithic Metals and Energy and the other with Rio Tinto PLC. In both joint ventures, the parties are earning an interest in the project and Zambezi is free carried for the first stage of the joint venture. Interpretation of the extensive high resolution helimagnetic and radiometric surveys in conjunction with joint venture partners Lithic Metals and Energy Limited ("Lithic") over Mulungushi, Mpande and Chumbwe licenses has identified high priority radiometric targets. These surveys were designed to extend high resolution geophysical coverage into these uranium project areas, and provide vital information on the structural, lithostratigraphic and radiometric framework of the projects. Lithic are the JV managers of this exploration work. On the Mpande License (PL220), Lithic have been following up the 41 anomalies of which 18 anomalies were deemed high priority. Over two thirds of these 41 anomalies have mapped and sampled by field geologist teams. Results reported on the 18th October for drilling conducted in the quarter included Assays for diamond drill hole MVUDD003 completed at the Mvula East uranium prospect, have revealed several zones of elevated uranium values up to 826ppm U3O8. Broader zones encountered included 6.04m @ 142.24ppm U3O8 from 187m (including 42cm @ 826ppm U3O8) and 7m @ 137ppm U3O8 from 206.24m (including 60cm @ 734ppm U3O8). Uranium mineralisation was generally intersected in metamorphosed dolomite units interfingered with biotite schists. Mvula East is a 6 kilometre-long uranium radiometric anomaly with surface rock chips to 736ppm U3O8. A scout programme of 8 broadly-spaced drill holes along the central 3 kilometres of the anomaly for a total of 1532.4 metres of drilling was completed in August of this year to assess the general distribution and tenor of uranium mineralization at depth. On the Chumbwe License (PL 227) where the Oryx project is located, results for the trenching (9,051m) completed in the June quarter identified narrow zones of uranium mineralisation. The channel rock samples returned bedrock uranium values that included 3m @ 642ppm U3O8 and 1m @ 839ppm U3O8. Better trenching uranium values were often associated with the presence of aplite and visible davidite, an iron-titanium uranium mineral. Uranium values from three adjacent trenches Trench 23: 3m @ 642 parts per million (ppm) U3O8 Trench 25: 3m @ 292 ppm U3O8 Trench 34: 1m @ 839 ppm U3O8 1m @ 272 ppm U3O8 In the June quarter a total of 1030.64 metres of drilling, over 11 broadly-spaced holes were completed at Oryx, testing a 2 kilometer-long section of an existing uranium radiometric anomaly located beneath anomalous uranium zones identified in trench sampling. This initial drilling programme intersected uranium at depth under trench mineralisation, although broad zones were not identified. Best values were restricted to narrow areas typified by hydrothermal alteration and/or structural disruption. Best results included: ORXDD005: 0.79m @ 463ppm U3O8 ORXDD007: 0.36m @ 425ppm U3O8 ORXDD010: 0.35m @ 227ppm U3O8 Results demonstrate that although narrow zones of uranium are present in the down-dip projection of lithological units associated with better uranium values observed in trenching, uranium mineralisation at Oryx does not appear to be controlled by lithology, and more likely reflects a structurally-controlled depositional environment. Due to the broad nature of this initial scout drilling programme, much of the Oryx uranium anomaly remains completely untested by drilling, and in particular, drilling has not tested for steeply dipping structural controls to uranium mineralisation. Lithic is now undertaking detailed test pitting to greater depths in trenching where zones of visible davidite and higher uranium values were encountered to gain a better understanding of possible structural controls to uranium mineralisation. Further exploration activities will be planned based on the outcome of this current programme of work. On the Mulungushi License (PL 224), initial targets have been identified and Lithic Metals and Energy field teams have assessed the majority of targets. Further interpretation is necessary and results from sampling are pending. During Q2, the Uranium Mineral Rights joint venture with Rio Tinto at the Mulofwe project announced the identification of several electromagnetic conductors within a regional shear zone interpreted to form part of the continent-scale Mwembeshi Shear system, following the completion of a major VTEM survey The shear zone is evident in electromagnetic and radiometric data over a strike length in excess of 30km, and continues beyond the survey boundary to the east and west. Preliminary interpretation suggests that the conductors are associated with the position of a regionally extensive graphitic shale unit. Previous radiometric surveys carried out by Zambezi have highlighted uranium anomalism believed to be associated with this unit. Geophysical modelling has been carried out on the eastern-most conductor within the shear zone. The modelling suggests the presence of a conductor of approximately 2km strike length dipping about 60o to the north and plunging gently to the east. The joint venture plans to conduct follow up work to investigate the potential for an association between the conductive graphitic shales, the uranium radiometric anomalism and potential uranium mineralisation. This work was commenced in Q3 2008 under the management of Rio Tinto as joint venture operators, and comprised trenching, geological mapping, PIMA surveying. In order to maximise the chances of success for the project, the joint venture partners have agreed to extend the area of the joint venture to cover the entirety of the prospective stratigraphy. This will be under the same terms of the existing Uranium Mineral Rights agreement. In Q3 2008, detailed lithological and structural mapping of the three trenches previously constructed by Zambezi Resources was carried out by Rio Tinto, confirming the presence of graphitic schist and also a carbonaceous phyllite. These units appear related to the uranium anomalism in the trench system and also a possible increase in deformation intensity. Wholerock geochemical analyses confirmed the position and magnitude of the uranium anomaly, and SEM analyses of selected mineralogical samples from the trenches highlighted the presence of sub-dravitic tourmalines, some of which were found to contain very fine U-silicate inclusions. Full spectral analyses of the samples from the trenches defined a ~30m wide zone of chlorite-kaolinite-halloysite alteration adjacent to the area of elevated uranium assays, though the pattern was complicated somewhat by changes in lithology and the heavy weathering of the samples. A small number of targets were selected for drill testing, focusing on the N-dipping conductor; unfortunately it was not possible to complete this phase of drilling this quarter. Competent Person Statement The information in this report that relates to Exploration Results is based on information compiled by General Manager Exploration Jay Klopper BSc (Hons). Mr Klopper is a full-time employee of Zambezi Resources, and a Member of the Australian Institute of Geoscientists. Mr Klopper is a Competent Person as defined in the December 2004 Edition of the "Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves" (the JORC Code) and consents to the inclusion in the report of the matters based on the information in the form and context in which it appears. The information in this report that relates to Resource Calculations is based on information compiled by Country Manager Mr Paul Weedon BAppSc (Geol), PGDipEconGeol, GradDipApp Fin, GDipManagement. Mr Weedon is a full-time employee of Zambezi Resources, and a Member of the Australasian Institute of Mining and Metallurgy. Mr Weedon is a Competent Person as defined in the December 2004 Edition of the "Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves" (the JORC Code) and consents to the inclusion in the report of the matters based on the information in the form and context in which it appears. The information in this report that relates to the interpretation of geophysical survey data is based on information compiled by Mr Bill Peters BSc (Hons), who is a Director and Senior Consulting Geophysicist of Southern Geoscience Consultants. Mr Peters is a Member of the Australian Institute of Geoscientists, and a Fellow of the Australasian Institute of Mining and Metallurgy, and is a Competent Person as defined in the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Peters consents to the inclusion in the report of the matters based on the information in the form and context in which it appears. Downloads of the announcement with figures are available on the Zambezi website www.zambeziresources.com For more information contact: Julian Ford, Managing Director Simon Edwards / Adam Lloyd Zambezi Resources (Australia) Evolution Securities Ltd +61 (08) 9216 9000 + 44 20 7071 4300 +61 (0) 418 949 580 Fiona Owen Grant Thornton UK LLP +44 20 7383 5100 This information is provided by RNS The company news service from the London Stock Exchange END MSCFDAFSFSASESS
1 Year Zambezi Resources Chart |
1 Month Zambezi Resources Chart |
It looks like you are not logged in. Click the button below to log in and keep track of your recent history.
Support: +44 (0) 203 8794 460 | support@advfn.com
By accessing the services available at ADVFN you are agreeing to be bound by ADVFN's Terms & Conditions