Highland Provides Exploration Update from the White Pine North Project, Michigan

Highland Copper Company Inc. (TSX VENTURE:HI) ("Highland" or the "Company") is
pleased to report the results from an initial exploration program conducted at
the White Pine North Project located in the Upper Peninsula of Michigan, an area
which has historically been one of the most important copper producing regions
in the United States. Figure 1 shows the projects in which Highland has an
interest.


Highland has recently completed the interim closing of the acquisition of the
White Pine copper project from Copper Range Company ("CRC"). The production at
the former White Pine mine from 1952 to 1995 was 198,070,985 short tons
averaging 1.14% copper, for approximately 4.5 billion pounds of copper. Mining
ceased at White Pine in 1995 due largely to depressed copper prices, although
significant amounts of mineralization remained, particularly to the north of the
former mine ("White Pine North"). In 1995, CRC completed an estimate of
resources at White Pine North based on 526 diamond drill holes. Highland's
exploration efforts are focused on that area, with the objective of completing a
National Instrument 43-101 compliant resource estimate in 2014.


White Pine North: Results from the 2014 Phase 1 In-Fill Drilling Program

During March and April 2014, Highland completed nine diamond drill holes
totaling 8,853 meters using HQ core size at White Pine North (Figure 2). Three
holes were cased for re-entry during the winter of 2015 because of spring
melting. Highland also completed eleven wedges from eight holes to obtain
approximately 435 kg of mineralized samples for metallurgical testing. Nine of
the 12 holes were drilled vertically and core recoveries averaged over 99
percent. Highland had designed its 2014 winter drilling program both to in-fill
the historical drill grid and to expand the historical mineral resource area.
The results from this first phase in-fill drilling program are consistent with
results from previous CRC drill programs and confirmed copper- silver
mineralization from adjacent historical drill holes.


Analytical results for the mineralized zones from the 2014 drilling program are
summarized in Table 1.


Table 1.   Drill hole intersections from the White Pine North Project 



                                                                            
                                                          True              
           Mineralized      From        To   Length  Thickness     Cu     Ag
Hole#             Unit       (m)       (m)      (m)        (m)      %    ppm
                                                                            
WP528      Upper Shale   603.125   604.940     1.82       1.82   1.01    5.7
         Parting Shale   607.405   609.690     2.29       2.29   1.31   30.1
                                                                            
WP531      Upper Shale   547.033   548.895     1.86       1.86   1.18    7.2
         Parting Shale   550.516   552.370     1.85       1.85   1.22   72.3
                                                                            
WP532      Upper Shale   866.085   868.385     2.30       2.30   1.05    5.9
         Parting Shale   870.445   872.235     1.79       1.79   0.88   10.0
                                                                            
WP533      Upper Shale   901.015   902.980     1.97       1.97   1.04    7.3
         Parting Shale   905.137   906.950     1.81       1.81   1.37   17.9
                                                                            
WP534      Upper Shale   791.560   793.975     2.42       2.09   1.30   8.12
         Parting Shale   796.660   799.420     2.76       2.39   0.99   7.67
                                                                            
WP535      Upper Shale   179.565   180.875     1.31       1.31   1.11    8.5
         Parting Shale   183.595   185.540     1.94       1.94   1.17   34.5
                                                                            
WP536      Upper Shale   928.370   929.705     1.34       1.34   0.88   3.90
         Parting Shale   931.840   934.475     2.63       2.63   1.03  13.31
                                                                            
WP537      Upper Shale   328.640   329.690     1.05       1.05   0.90    6.1
         Parting Shale   333.035   335.080     2.04       2.04   0.89    7.8
                                                                            
WP538      Upper Shale   813.010   814.776     1.77       1.77   0.68   4.34
         Parting Shale   817.770   819.585     1.82       1.82   1.10   2.20
                                                                            
WP539      Upper Shale   991.485   993.655     2.17       2.06   0.23   3.65
         Parting Shale   996.035   999.380     3.35       3.18   1.21  13.16
                                                                            
WP540      Upper Shale   886.897   888.365     1.47       1.46   1.31   9.68
         Parting Shale   890.620   892.488     1.87       1.85   1.10  25.71
                                                                            
WP541      Upper Shale   876.330   877.770     1.44       1.43   1.16   9.09
         Parting Shale   880.345   882.195     1.85       1.84   1.14  29.07



"Parting Shale" is an assemblage of five mineralized stratigraphic units at the
base of the Nonesuch Formation. The Upper Shale consists of a similar assemblage
of four mineralized units about 1.2 meters above the Parting Shale.


Activation Laboratories in Thunder Bay, Ontario, Canada (IOS 17025
accreditation), assayed all samples using an ICP method tailored for the project
samples, followed by a metallic procedure for samples containing at least 0.1%
Cu. Highland applied industry standard QA/QC protocols to all steps of the
drilling program.


White Pine North: Validation of Historical Drilling Data

In January 2014, Highland initiated an analytical program to validate historical
assay results from 51 diamond drill holes completed by CRC in the White Pine
North deposit. Thirty-six of these holes were drilled between 1958 and 1980 with
both BQ and AQ core, while the other 15 holes were drilled in 1994 and 1995 with
NQ core.


Highland's validation program used a 1/4 cut of the original whole core from 883
historic sample intervals. This resampling duplicated the exact interval
previously sampled and assayed in the historical programs. The remaining 1/4 of
the original core was retained as reference material. The validation analytical
technique used both a screen metallic assay method and a 2.5-gram digestion ICP
assay method to determine total copper and results from both methods were in
good agreement. The location of the validated historical drill holes is shown on
Figure 2.


The results from this validation program are shown graphically on Figure 3.
Highland considers the correlation between the historical and validation assays
to be excellent, showing no bias between the two groups of assays. Highland
plans to use the sample values from the original program for a future resource
estimate at White Pine North.


Plans Going Forward

Highland plans to complete a second phase drilling program by boring ten drill
holes totaling approximately 6,100 m, during the summer and fall of 2014. These
drill holes will focus on the higher-grade central portion of the deposit.


Highland has retained G Mining Services Inc. to carry out a number of technical
studies including metallurgy, infrastructure requirements and mining methods
that are intended to be used in a future prefeasibility study. The Company has
also retained the services of Golder Associates to initiate hydrological studies
of the area overlaying the White Pine North deposit.


Qualified Person

The technical information contained in this news release has been approved by
Carlos Bertoni, P.Geo. Highland's Project Manager. Mr. Bertoni is a qualified
person as defined in NI 43-101.


ABOUT HIGHLAND

Highland Copper Company Inc. is a Canadian exploration company focused on
exploring and developing copper projects in the Upper Peninsula of Michigan,
U.S.A. For more information about the White Pine project refer to the "Technical
Report on the White Pine Copper Property, White Pine, Michigan, USA" dated as of
February 10, 2014 and filed on SEDAR (www.sedar.com) on April 3, 2014. Highland
has approximately $3.2 million in cash at June 30, 2014 and has 96,966,745
issued and outstanding common shares listed on the TSXV under the symbol 'HI'.
Additional information about Highland is available on the Company's website at
www.highlandcopper.com and on SEDAR at www.sedar.com.


CAUTIONARY STATEMENT

Certain statements contained in this press release constitute forward looking
information under the provisions of Canadian securities laws. Such statements
include without limitation: the Company's plans and objectives to complete a
current mineral resource and expand the historical estimate at White Pine North;
statements about completing studies for a prefeasibility studies; the long-term
potential of Highland's project; and other statements and information regarding
anticipated results regarding the Company's operations and exploration. Such
statements reflect the Company's views as at the date of this press release and
are subject to certain risks, uncertainties and assumptions, and undue reliance
should not be placed on such statements. Actual results may be materially
different from those currently anticipated. Many factors, known and unknown
could cause the actual results to be materially different from those expressed
or implied by such forward looking statements. Such risks include, but are not
limited to: the Company being unable to satisfy the remaining conditions to
complete the final closing of the White Pine acquisition; further drilling will
be required to confirm and expand the historical estimate as a current mineral
resource, and there is no certainty that this can be accomplished; the
availability of additional funds to complete the Company's planned exploration
and development programs; mining risks; risks associated with governmental and
environmental regulation and obtaining all the necessary permits for the
development of the project; and risks associated with global economic growth.
The Company does not intend, and does not assume any obligation, to update these
forward-looking statements and information, except as required by law.
Accordingly, readers are advised not to place undue reliance on forward-looking
statements.


Neither the TSX Venture Exchange nor its Regulation Services Provider (as that
term is defined in the policies of the TSX Venture Exchange) accepts
responsibility for the adequacy or accuracy of this release.


Figure 1, Figure 2 and Figure 3 are available at this address :
http://media3.marketwire.com/docs/955650e_Figures.pdf 


FOR FURTHER INFORMATION PLEASE CONTACT: 
David Fennell, Executive Chairman
+1.450.677.2455


James Crombie, Interim President
+1.450.677.2455
[e-mail]
www.highlandcopper.com